The Bomag 05833008 Pressure Switch is a genuine OEM component designed for a wide range of Bomag tandem rollers, single drum rollers, recycler/stabilizers, and trench compactors. This pressure switch delivers an exact fit across models including the BW 120 AD, BW 164 AD, BW 202 AD-2, BW 213 D, BW 124 D, MPH 121, MPH 122, MPH 600, RS 500, RS 650, BW 850 T, and BW 1050 T, among others. Sourced directly from Bomag, this part carries the same specifications as the original, so you can install it with confidence and get your machine back to work without guesswork.
Key Features
- Genuine OEM Sensing Accuracy — manufactured to Bomag's original pressure threshold specifications, ensuring the switch opens and closes at the correct system pressure for your machine
- Direct Drop-In Replacement — matches the original connector type, thread pitch, and pressure rating, so installation is straightforward with no adapters or rework
- Broad Verified Fitment — confirmed for Bomag BW-series tandem and single drum rollers, MPH and RS recycler/stabilizers, and BW-series trench compactors, including the BW 161 AC-2, BW 164 AC-2, BW 202 AHD-2, MPH 122-2, MPH 125, MPH 600 3B/4i-PB, MPH 600 EU-FLEX, RS 460, BW 850 TR, and more
- Hydraulic System Integrity — a correctly functioning pressure switch protects the hydraulic circuit by signaling high or low pressure events before they escalate into costly pump or motor damage
- Electrical Safety Compliance — as a safety-critical sensor in the hydraulic and drivetrain monitoring circuit, using a genuine OEM part ensures the switch responds correctly to fault conditions, keeping operator alerts and shutdowns working as intended
A pressure switch is an electro-hydraulic sensor that monitors fluid pressure within a machine's hydraulic system and triggers an electrical signal when pressure rises above or falls below a set threshold. On Bomag rollers, recycler/stabilizers, and trench compactors, this signal feeds into the machine's control or warning circuit to alert the operator — or initiate a protective shutdown — before a pressure fault causes damage to pumps, motors, or other hydraulic components. When a pressure switch fails or drifts out of calibration, the machine may lose its ability to detect dangerous pressure conditions, operate with false warnings, or shut down unexpectedly, all of which interrupt productive compaction or stabilization work.
Part Details
| Part Number | 05833008 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Pressure Switch |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Tandem Roller | BW 120 AD | 00810019, 00810051, 00810146 |
| Single Drum Roller | BW 124 D | 00810079 |
| Tandem Roller | BW 164 AD | 00810155 |
| Single Drum Roller | BW 213 D | 00814209 |
| Tandem Roller | BW 161 AC-2 | 00817492 |
| Tandem Roller | BW 161 AD-2 | 00817493, 00817494 |
| Tandem Roller | BW 164 AC-2 | 00817495 |
| Tandem Roller | BW 202 AD-2 | 00817516, 00817517 |
| Tandem Roller | BW 202 AHD-2 | 00817518 |
| Recycler / Stabilizer | MPH 121 | 00817587 |
| Recycler / Stabilizer | MPH 122 | 00817595 |
| Tandem Roller | BW 164 AD-2 | 00817640 |
| Recycler / Stabilizer | MPH 122-2 | 00818177, 00818727, 00818911, 00824987 |
| Recycler / Stabilizer | MPH 125 | 00818273, 00818681, 00818909 |
| Recycler / Stabilizer | MPH 600 | 00824097, 00824099 |
| Recycler / Stabilizer | MPH 600 3B/4i-PB | 00824645 |
| Recycler / Stabilizer | MPH 600 EU-FLEX | 00824751 |
| Recycler / Stabilizer | RS 500 | 00824753, 00824755 |
| Recycler / Stabilizer | RS 460 | 00824809 |
| Recycler / Stabilizer | RS 650 | 00825131 |
| Trench Compactor | BW 1050 T | 00815203 |
| Trench Compactor | BW 850 T | 00811652 |
| Trench Compactor | BW 850 TR | 00815210 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
