The Bomag 05821351 Protection Cap is a genuine OEM component designed for a wide range of Bomag equipment, including the BF 800 C S600 and BF 600 P-3 S 500 pavers, the BW 332 single drum roller, BC 472 RB and BC 472 RS refuse/landfill compactors, the BC 462 EB soil compactor, MPH 125, MPH 600, MPH 600 3B/4i-PB, MPH 600 EU-FLEX, and RS 650 recyclers/stabilizers, and the BM 1200/30 and BM 1300/30 cold milling machines. Sourced directly from Bomag, this protection cap carries the same part number 05821351 as the original factory component, so you can order with confidence that it matches the spec your machine was built to. This part is the correct replacement whether you are servicing a paver, a refuse compactor, a soil compactor, a recycler/stabilizer, or a cold milling machine across this broad family of Bomag equipment.
Key Features
- Genuine OEM Construction — manufactured by Bomag to the same material and dimensional standards as the cap fitted at the factory, ensuring the same protective performance over the service life of the component.
- Direct-Replacement Fit — designed to install in exactly the same position and orientation as the original, requiring no trimming, shimming, or adaptation before fitment.
- Broad Multi-Family Compatibility — fits Bomag pavers including the BF 800 C S600, BF 800 P S500, and BF 600 P-3 S 500; the BW 332 single drum roller; BC 472 RB, BC 472 RS, and BC 462 RB refuse/landfill compactors; BC 462 EB soil compactor; MPH 125, MPH 600, MPH 600 3B/4i-PB, MPH 600 EU-FLEX, and RS 650 recyclers/stabilizers; and BM 1200/30 and BM 1300/30 cold milling machines.
- Sustained Component Protection — a properly fitted protection cap shields the underlying fitting or port from ingress of dirt, debris, and moisture, preventing corrosion and premature wear that can lead to leaks or component failure.
- Exact Part Number Match — use part number 05821351 when ordering to confirm you are receiving the correct Bomag cap for your specific machine configuration.
A protection cap is a small but critical sealing and shielding component that covers an exposed port, fitting, connector, or end of a line to prevent contamination from entering the system when the machine is in service, during transport, or while components are disconnected for maintenance. Without a properly seated cap, dirt, water, and debris can work their way into hydraulic ports, fuel connections, or electrical interfaces, causing corrosion, blockages, or seal damage that can escalate into costly repairs. Replacing a missing or damaged protection cap promptly is a straightforward step that preserves the integrity of the surrounding system and avoids secondary failures across a wide range of equipment types.
Part Details
| Part Number | 05821351 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Protection Cap |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Paver | BF 800 C S600 | 00800873 |
| Paver | BF 800 P S500 | 00800879 |
| Recycler / Stabilizer | MPH 125 | 00818273, 00818681, 00818909 |
| Refuse / Landfill Compactor | BC 472 RB | 00818439, 00818899 |
| Refuse / Landfill Compactor | BC 472 RS | 00818441, 00818907 |
| Soil Compactor | BC 462 EB | 00818443, 00818903 |
| Refuse / Landfill Compactor | BC 462 RB | 00818445, 00818905 |
| Single Drum Roller | BW 332 | 00818725 |
| Recycler / Stabilizer | MPH 600 | 00824097, 00824099 |
| Recycler / Stabilizer | MPH 600 3B/4i-PB | 00824645 |
| Recycler / Stabilizer | MPH 600 EU-FLEX | 00824751 |
| Cold Milling Machine | BM 1200/30 | 00824963 |
| Cold Milling Machine | BM 1300/30 | 00824965, 00825095 |
| Recycler / Stabilizer | RS 650 | 00825131 |
| Paver | BF 600 P-3 S 500 | 00826971 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
