The Bomag 06180301 Rubber Buffer is a genuine OEM component designed for Bomag BT-series tampers — including the BT 50, BT 55, BT 58, BT 60, BT 60/4, BT 65, BT 65/4, BT 68, BT 70, BT 75, BT 80 D, and BT 80 D - Torso — as well as the BW 65 and BW 65 D walk-behind rollers. Sourced directly from Bomag, this rubber buffer carries the exact OEM specification required for a drop-in replacement with no guesswork on compatibility. If your machine is showing increased vibration transmission, impact noise, or visible deterioration at the buffer mounting point, this component is the correct restoration part. Keep part number 06180301 on hand as a scheduled service item to maintain consistent machine behavior across your fleet.
Key Features
- OEM-Grade Rubber Compound — Manufactured to Bomag's material specification, delivering the correct Shore hardness and compression resistance needed to absorb and isolate operational shock loads on tampers and walk-behind rollers.
- Direct Bolt-In Replacement — Molded to the original profile and mounting dimensions, this rubber buffer seats into the existing mount without trimming, shimming, or adaptation.
- Broad BT-Series and BW 65 Coverage — Fits the BT 50, BT 55, BT 58, BT 60, BT 60/4, BT 65, BT 65/4, BT 68, BT 70, BT 75, BT 80 D, BT 80 D - Torso, BW 65, and BW 65 D — confirming fitment before you order with part number 06180301.
- Vibration Isolation Restored — A worn or cracked buffer allows metal-to-metal contact that increases operator fatigue, accelerates wear on surrounding components, and degrades compaction consistency. Replacing this part restores the designed isolation between the drive assembly and the frame.
- Operator Safety Compliance — Rubber buffers are a primary vibration-damping element on hand-guided compaction equipment. Keeping this component in serviceable condition supports compliance with hand-arm vibration exposure limits for equipment operators.
The rubber buffer is a vibration-isolating mount that sits between the tamper's or roller's reciprocating or rotating drive components and the surrounding frame structure. Its job is to absorb and dampen the high-frequency shock energy produced during compaction, preventing that energy from transferring directly into the machine chassis and the operator's hands. When the rubber degrades — hardening, cracking, or tearing — isolation is lost, vibration levels climb, and the added stress accelerates wear on adjacent housings, fasteners, and guide components. Replacing the Bomag 06180301 Rubber Buffer at the first sign of deterioration is one of the most cost-effective preventive maintenance steps available on these machines.
Part Details
| Part Number | 06180301 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Rubber Buffer |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Tamper | BT 58 | 00813209, 00813216, 00811598, 00813217, 00813214, 00813218, 00813219, 00813221, 00811613 |
| Tamper | BT 60 | 00813225, 00813226, 00817451 |
| Tamper | BT 65 | 00817452, 00813230, 00813231 |
| Tamper | BT 65/4 | 00817453, 00818017, 00818199, 00818601, 00818739, 00818785, 00818833, 00824171, 00824343 |
| Tamper | BT 75 | 00817454, 00813235, 00811620 |
| Tamper | BT 80 D | 00817455, 00818735, 00825495, 00813245, 00811621 |
| Tamper | BT 60/4 | 00817456, 00817997, 00818197, 00818629, 00818737, 00818783, 00818827, 00824169 |
| Walk-Behind / Light Roller | BW 65 | 00826395 |
| Walk-Behind / Light Roller | BW 65 D | 00826685 |
| Tamper | BT 50 | 00813203, 00813205 |
| Tamper | BT 50 Typ2 | 00811618 |
| Tamper | BT 55 | 00813240, 00811617 |
| Tamper | BT 68 | 00811599, 00811609, 00811610, 00811611, 00811612, 00811614, 00811615 |
| Tamper | BT 70 | 00813206, 00811623 |
| Tamper | BT 80 D - Torso | 00811622 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
