The Bomag 05740054 Seal is a genuine OEM replacement built for Bomag BW-series tandem rollers and BMP 8500 trench compactors. Sourced directly from Bomag, this seal matches the original component specification, ensuring a proper fit across a wide range of compatible machines including the BW 80 AD-2, BW 90 AD-2, BW 100 ADM-2, BW 131 AD-2, BW 174 AP-4, BW 202 AD-5, and many additional BW tandem roller variants. As a genuine OEM part, part number 05740054 carries the same design and material standards as the seal that left the factory, so there is no guesswork on fitment or compatibility.
Key Features
- Genuine OEM Sealing Material — manufactured to Bomag's original compound and dimensional tolerances, delivering consistent compression and fluid retention specific to this seal application
- Direct Drop-In Replacement — engineered to the same profile and cross-section as the original, allowing installation without modification to the surrounding housing or mating surfaces
- Broad Tandem Roller Coverage — fits an extensive range of BW-series tandem rollers including the BW 80 AD-2, BW 90 AD-5, BW 100 ADM-5, BW 131 ACW-3, BW 161 AD-5, BW 190 AD-5, BW 202 AD-5, BW 174 AP-4, and additional variants, as well as the BMP 8500 and BMP 8500 Kubota trench compactors
- Leak Prevention Where It Counts — a properly seated seal keeps fluids contained within the designated circuit; a deteriorated or improperly sized seal leads to fluid loss, contamination of adjacent components, and accelerated wear
- Fluid System Integrity — maintaining a sound seal is critical in hydraulic and drivetrain circuits, where even a minor breach can cause pressure loss, overheating, or system failure during compaction operations
A seal serves as a barrier between two mating surfaces or rotating components, preventing fluid — whether hydraulic oil, gear oil, or grease — from migrating out of its intended circuit or allowing contaminants to enter. On tandem rollers like the BW-series, seals are found throughout the drum drive, steering, and hydraulic systems, where maintaining correct pressure and lubrication is essential to smooth, controlled compaction. When a seal wears, hardens, or cracks, fluid leaks develop quickly, leading to pressure drop, overheating, and potential damage to pumps, motors, or bearings that depend on a fully sealed system to function correctly.
Part Details
| Part Number | 05740054 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Seal |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Tandem Roller | BW 80 AD-2 | 00810280, 00817566 |
| Tandem Roller | BW 90 AD-2 | 00810281, 00817569, 00818041, 00818507 |
| Tandem Roller | BW 100 ADM-2 | 00817459 |
| Tandem Roller | BW 131 ACW-2 | 00817468 |
| Tandem Roller | BW 131 AD-2 | 00817469 |
| Tandem Roller | BW 80 ADS | 00817567, 00818513 |
| Tandem Roller | BW 90 AC-2 | 00817568, 00818045 |
| Tandem Roller | BW 100 SCC-5 | 00818505, 00824127, 00825295 |
| Tandem Roller | BW 170 AP AM | 00818515 |
| Tandem Roller | BW 174 AP | 00818517 |
| Tandem Roller | BW 174 ACP | 00818519 |
| Tandem Roller | BW 174 ACP-AM | 00818535 |
| Tandem Roller | BW 174 AP-AM | 00818537 |
| Tandem Roller | BW 174 AP-4 AM | 00818655, 00818845, 00824543 |
| Tandem Roller | BW 174 AP-4 | 00818657, 00818847, 00824545 |
| Trench Compactor | BMP 8500 | 00818667, 00824277, 00825393, 00826969, 00827003 |
| Tandem Roller | BW 131 ACW-3 | 00818697 |
| Tandem Roller | BW 131 AD-3 | 00818699 |
| Tandem Roller | BW 80 AD-5 | 00818707, 00824117, 00825283 |
| Tandem Roller | BW 90 AD-5 | 00818709, 00824119, 00825285 |
| Tandem Roller | BW 100 ADM-5 | 00818711, 00824121, 00825289 |
| Tandem Roller | BW 90 SC-5 | 00818713, 00824125 |
| Tandem Roller | BW 100 SC-5 | 00818715, 00824129 |
| Tandem Roller | BW 100 ACM-5 | 00818717, 00824123, 00825291 |
| Tandem Roller | BW 174 AP-4 AM PB | 00818971 |
| Tandem Roller | BW 174 AP-4 PB | 00818973 |
| Tandem Roller | BW 174 AP-4i AM | 00824093, 00824627, 00825051 |
| Tandem Roller | BW 174 AP-4i | 00824095, 00824629, 00825053 |
| Tandem Roller | BW 161 AD-5 | 00824103, 00824647 |
| Tandem Roller | BW 161 AC-5 | 00824109, 00824655 |
| Tandem Roller | BW 161 ADO-5 | 00824359, 00824657 |
| Tandem Roller | BW 190 AD-5 | 00824361, 00824651 |
| Tandem Roller | BW 190 ADO-5 | 00824363, 00824661 |
| Tandem Roller | BW 202 AD-5 | 00824649 |
| Tandem Roller | BW 174 APO-4i | 00825099 |
| Tandem Roller | BW 174 ACP 4I AM | 00825103 |
| Tandem Roller | BW 90 AC-5 | 00825287 |
| Tandem Roller | BW 90 SL-5 | 00826551 |
| Tandem Roller | BW 90 SL-5 CC | 00826783 |
| Tandem Roller | BW 100 SLM-5 | 00827125 |
| Trench Compactor | BMP 8500 Kubota | 00827611 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
