The Bomag 06052123 Crankshaft Position Sensor is a genuine OEM component designed for a wide range of Bomag pavers, cold milling machines, refuse and landfill compactors, soil compactors, and recycler/stabilizers. This sensor delivers the exact signal characteristics and connector fit required by the engine management system across compatible machines, including BF 600 and BF 700 pavers, BM 1000/35, BM 1200/35, and BM 1300/35 cold milling machines, BC-series refuse, landfill, and soil compactors, and RS 460 and RS 500 recycler/stabilizers. Sourced directly from Bomag, this part carries the same specification as the component installed at the factory, ensuring seamless integration with existing wiring and ECU calibration. Confirming part number 06052123 against your machine's serial plate before ordering is always recommended to ensure a correct match.
Key Features
- Genuine OEM Signal Accuracy — outputs the precise crankshaft timing signal required by Bomag engine management systems, maintaining correct fuel injection timing and ignition control
- Direct Connector and Mounting Fit — matches the original sensor's thread pitch, body diameter, and wiring connector, allowing installation without adapter hardware or harness modification
- Broad Bomag Fleet Coverage — fits BF 600 and BF 700 pavers, BM 1000/35, BM 1200/35, and BM 1300/35 cold milling machines, BC 473 and BC 772 refuse, landfill, and soil compactors, BC 972 RB-4, BC 1172 RB-4, and RS 460 and RS 500 recycler/stabilizers, among others
- Engine Protection Through Accurate Timing — a worn or failed crankshaft position sensor causes rough running, hard starting, or complete engine shutdown; replacing it promptly restores stable combustion and protects downstream engine components
- Fuel System Safety Compliance — correct crankshaft position sensing is integral to the engine's fuel cutoff logic; an OEM-spec sensor ensures the system responds accurately under all operating conditions, supporting safe machine shutdown when required
The crankshaft position sensor monitors the rotational speed and position of the crankshaft and sends a continuous signal to the engine control unit, which uses that data to calculate injection timing and manage engine output. Without an accurate signal, the ECU cannot correctly time fuel delivery, leading to power loss, erratic idling, excessive fuel consumption, or a no-start condition. Replacing a failed sensor with a correctly specified OEM unit restores the engine's ability to run cleanly and efficiently, and keeps the machine's diagnostic system reading accurately.
Part Details
| Part Number | 06052123 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Crankshaft Position Sensor |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Paver | BF 600 C-2 S 500 | 00800791, 00824199 |
| Paver | BF 600 P-2 S 500 | 00800795, 00800865, 00825913 |
| Paver | BF 700 C-2 S 600 | 00800797, 00800867 |
| Paver | BF 700 C-2 S 500 | 00800799, 00800869 |
| Paver | BF 700 C S500 | 00824207 |
| Cold Milling Machine | BM 1000/35 | 00824229, 00824795 |
| Refuse / Landfill Compactor | BC 772 RB-4 | 00824355 |
| Refuse / Landfill Compactor | BC 473 RB-4 | 00824525 |
| Refuse / Landfill Compactor | BC 473 RS-4 | 00824527 |
| Refuse / Landfill Compactor | BC 772 RS-4 | 00824529 |
| Refuse / Landfill Compactor | BC 672 RB-4 | 00824531 |
| Cold Milling Machine | BM 1200/35 | 00824533, 00824797 |
| Cold Milling Machine | BM 1300/35 | 00824535, 00824799 |
| Recycler / Stabilizer | RS 500 | 00824755 |
| Recycler / Stabilizer | RS 460 | 00824809, 00825189 |
| Soil Compactor | BC 473 EB-4 | 00824855 |
| Soil Compactor | BC 772 EB-4 | 00824857 |
| Refuse / Landfill Compactor | BC 972 RB-4 | 00824899 |
| Refuse / Landfill Compactor | BC 1172 RB-4 | 00824901 |
| Cold Milling Machine | BM 1200/35 T4f | 00825167 |
| Cold Milling Machine | BM 1300/35 T4f | 00825169 |
| Recycler / Stabilizer | RS460 STAGE V | 00825263 |
| Paver | BF 600 C-2 S 600 | 00825903 |
| Cold Milling Machine | BM 1000/35-2 | 00826457 |
| Cold Milling Machine | BM1200/35-2 | 00826485 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
