The Bomag 58070816 Sleeve is a genuine OEM replacement built for a wide range of Bomag single drum rollers, tandem rollers, and refuse/landfill compactors. Sourced directly from Bomag, this sleeve carries the same specifications as the original component installed at the factory, ensuring a correct, trouble-free installation every time. This part is confirmed for fitment across BW-series single drum rollers including the BW 216 D-3, BW 219 DH-4, BW 226 PDH-4, and BW 220 D-4, as well as tandem rollers such as the BW 161 AD-4, BW 190 AD-4, BW 202 AD-5, BW 206 AD-5, BW 120 AD-5, BW 100 AD-5, BW 154 AP-4, and many additional BW variants, plus the BC 972 RB-4 and BC 1172 RB-4 refuse/landfill compactors. When you verify part number 58070816 against your machine's serial plate and parts manual, you can order with confidence that this sleeve will seat correctly without rework or shimming.
Key Features
- Genuine OEM Dimensional Accuracy — manufactured to Bomag's original bore tolerances and surface-finish specifications, so this sleeve seats and retains exactly as the factory-installed component did
- Direct Drop-In Replacement — matches the original mounting geometry of the BW-series and BC-series machines listed, allowing straightforward removal of the worn sleeve and installation of the new one without machining or adapters
- Broad Fleet Coverage — fits an extensive range of Bomag equipment, including BW single drum rollers (BW 211 D-40, BW 212 D-40, BW 225 D-3, and more), BW tandem rollers (BW 138 AD-5, BW 135 AD-5, BW 191 AD-5, BW 203 AD-4, BW 205 AD 4, and others), and BC 972 RB-4 and BC 1172 RB-4 refuse/landfill compactors
- Structural Integrity Under Load — a correctly fitted sleeve maintains proper bore alignment and load transfer within the assembly; a worn or undersized sleeve allows movement that accelerates wear on mating components and can lead to assembly failure
- Verified Part Number — ordering by part number 58070816 ensures you receive the correct Bomag OEM component rather than a dimensionally similar but non-interchangeable substitute
A sleeve is a precision-fitted cylindrical liner installed into a bore or housing to provide a controlled bearing surface, protect the parent material from wear, or restore a bore to its correct diameter after wear has occurred. In compaction equipment like Bomag rollers and compactors, sleeves are commonly found in pivot points, pin bores, and hydraulic or drivetrain assemblies where metal-to-metal contact and high compressive loads are routine. When a sleeve wears beyond its serviceable limit, it allows excess play in the assembly, causing accelerated damage to surrounding components, vibration, and loss of operational precision — making timely replacement essential to keeping the machine working efficiently.
Part Details
| Part Number | 58070816 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Sleeve |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Single Drum Roller | BW 216 D-3 | 00817535 |
| Single Drum Roller | BW 216 DH-3 | 00817537 |
| Single Drum Roller | BW 219 DH-3 | 00817540 |
| Single Drum Roller | BW 219 PDH-3 | 00817544 |
| Single Drum Roller | BW 225 D-3 | 00817546, 00817548 |
| Single Drum Roller | BW 225 | 00817549 |
| Tandem Roller | BW 161 AD-4 | 00817641 |
| Tandem Roller | BW 161 ADH-4 | 00817739 |
| Single Drum Roller | BW 216 DH-4 | 00817793, 00818155, 00818849 |
| Single Drum Roller | BW 216 PDH-4 | 00817795, 00818157 |
| Single Drum Roller | BW 219 DH-4 | 00817799, 00818163, 00818857 |
| Single Drum Roller | BW 219 PDH-4 | 00817807, 00818071, 00818859 |
| Single Drum Roller | BW 226 DH-4 | 00817809, 00818049, 00818073, 00818861, 00818865, 00825077 |
| Single Drum Roller | BW 226 PDH-4 | 00817811, 00818075 |
| Tandem Roller | BW 190 AD-4 | 00817823, 00818379, 00818965, 00824009 |
| Tandem Roller | BW 190 AD-4 AM | 00817825, 00818309, 00824021 |
| Single Drum Roller | BW 219 D-4 | 00817835, 00818095, 00818373, 00818853, 00824821 |
| Tandem Roller | BW 161 AC-4 | 00817947 |
| Single Drum Roller | BW 219 PD-4 | 00818097, 00818375, 00818855 |
| Tandem Roller | BW 154 AP-4 AM | 00818299, 00824177, 00824715 |
| Tandem Roller | BW 154 AP-4 | 00818301, 00824179, 00824717 |
| Tandem Roller | BW 154 ACP-4 AM | 00818303, 00824719 |
| Tandem Roller | BW 154 ACP-4 | 00818305, 00824721 |
| Tandem Roller | BW 161 ADH-4 CHINA | 00818365 |
| Single Drum Roller | BW 211 D-40 | 00818371, 00818875, 00824269 |
| Tandem Roller | BW 202 AD-4 | 00818381, 00818961, 00824005 |
| Tandem Roller | BW 203 AD-4 AM | 00818591, 00824019, 00825067 |
| Tandem Roller | BW 203 AD-4 | 00818599, 00818963 |
| Tandem Roller | BW 138 AC-5 | 00818719, 00824923, 00824929, 00825561 |
| Tandem Roller | BW 138 AD-5 | 00818721, 00824175, 00824921, 00824927, 00825351, 00825559 |
| Tandem Roller | BW 135 AD-5 | 00818723, 00824931, 00825355, 00825563 |
| Single Drum Roller | BW 220 D-4 | 00818989 |
| Tandem Roller | BW 174 AP-4i AM | 00824093, 00824627, 00825051 |
| Tandem Roller | BW 174 AP-4i | 00824095, 00824629, 00825053 |
| Tandem Roller | BW 161 AD-50 | 00824111 |
| Tandem Roller | BW 202 AD-50 | 00824113 |
| Single Drum Roller | BW 212 D-40 | 00824279 |
| Tandem Roller | BW 191 AD-5 | 00824281, 00825965 |
| Tandem Roller | BW 206 AD-5 | 00824283, 00825967 |
| Tandem Roller | BW 206 AD-5 AM | 00824287 |
| Tandem Roller | BW 206 AD-50 | 00824289 |
| Tandem Roller | BW 154 AP-4i AM | 00824385 |
| Tandem Roller | BW 202 AD-4 EU-Flex | 00824395 |
| Tandem Roller | BW 203 AD-4 AM EU-Flex | 00824397 |
| Tandem Roller | BW 161 ADO-50 | 00824417 |
| Tandem Roller | BW 202 ADO-50 | 00824419 |
| Tandem Roller | BW 154 AP-4i | 00824587 |
| Tandem Roller | BW 154 ACP-4i AM | 00824589, 00825383 |
| Tandem Roller | BW 191 ADO-5 | 00824599 |
| Tandem Roller | BW 206 ADO-5 | 00824601 |
| Tandem Roller | BW203AD-4 | 00824739, 00826243 |
| Single Drum Roller | BW 220 D-40 | 00824803, 00824989 |
| Tandem Roller | BW 161 AC-50 | 00824853 |
| Tandem Roller | BW 205 AD 4 | 00824889 |
| Refuse / Landfill Compactor | BC 972 RB-4 | 00824899 |
| Refuse / Landfill Compactor | BC 1172 RB-4 | 00824901 |
| Tandem Roller | BW 203 ADO-4 | 00825049 |
| Tandem Roller | BW 174 APO-4i | 00825099 |
| Tandem Roller | BW 174 ACP 4I AM | 00825103 |
| Tandem Roller | BW 191 AD-5 AM | 00825969 |
| Tandem Roller | BW 206 ADO-50 | 00826103 |
| Tandem Roller | BW 120 AD-5 | 00826639, 00826689 |
| Tandem Roller | BW 120 SL-5 | 00826779 |
| Tandem Roller | BW 100 AD-5 | 00826813 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
