The Bomag 05940030 Inclination Sensor is a genuine OEM component designed for Bomag cold milling machines across a wide range of models, including the BM 500/15, BM 600/15, BM 1000/35, BM 1200/35, BM 1300/35, BM 2000/60-2, BM 2000/75, and BM 2200/75 series. Sourced directly from Bomag, this sensor meets the original engineering specifications for precise inclination monitoring in demanding milling applications. This inclination sensor is a direct OEM replacement, ensuring seamless integration with the machine's control system without the guesswork of adapting an off-spec component. Confirmed fitment extends across multiple generations of Bomag cold milling machines, including EU-Flex, T4f, T4i, Stage V, and second-generation variants.
Key Features
- OEM Sensing Accuracy — manufactured to Bomag's original signal output and detection angle specifications, delivering the precise inclination readings that the milling machine's control system depends on.
- Direct Plug-In Replacement — matches the original connector, mounting configuration, and output characteristics, allowing installation without wiring modifications or adapter hardware.
- Broad Cold Milling Machine Coverage — fits an extensive lineup of Bomag BM-series cold milling machines, including the BM 500/15, BM 600/15, BM 1000/35, BM 1200/35, BM 1300/35, BM 2000/60-2, BM 2000/75, BM 2200/75, and additional EU-Flex, Stage V, and generation-2 variants.
- Grade and Slope Control Integrity — a correctly functioning inclination sensor is critical to maintaining accurate milling depth and surface grade; a faulty sensor can cause erratic automatic leveling behavior and off-spec cut profiles.
- Electrical System Compliance — as a genuine OEM part, this sensor is fully compatible with the machine's electronic control unit, eliminating the risk of fault codes or sensor mismatch errors caused by non-original components.
An inclination sensor monitors the tilt angle of the machine or one of its key assemblies, feeding real-time positional data to the milling machine's control and leveling system. This information is used to automatically adjust the cutting drum depth and keep the milled surface within the specified grade tolerance, which is especially critical on road profiling and surface preparation work. When the inclination sensor fails or drifts out of calibration, the machine can lose automatic grade control, resulting in uneven milling depth, increased operator intervention, and surface profiles that fall outside project specifications.
Part Details
| Part Number | 05940030 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Inclination Sensor |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM 2000/60-2 | 00800693, 00800695 |
| Cold Milling Machine | BM 600/15 | 00818099, 00818175 |
| Cold Milling Machine | BM 500/15 | 00818173, 00818873, 00824553 |
| Cold Milling Machine | BM 1000/35 | 00824229, 00824569, 00824795 |
| Cold Milling Machine | BM 1200/35 | 00824533, 00824631, 00824797 |
| Cold Milling Machine | BM 1300/35 | 00824535, 00824633, 00824799 |
| Cold Milling Machine | BM 500/15 EU-Flex | 00824539 |
| Cold Milling Machine | BM 2000/75 | 00824741 |
| Cold Milling Machine | BM 500 15 P8 | 00824743 |
| Cold Milling Machine | BM600 /15 | 00824745 |
| Cold Milling Machine | BM 2200/75 | 00824801 |
| Cold Milling Machine | BM 600/15 EU-Flex | 00824943 |
| Cold Milling Machine | BM 600/15 EU-Flex T4i | 00825065 |
| Cold Milling Machine | BM 1200/35 T4f | 00825167 |
| Cold Milling Machine | BM 1300/35 T4f | 00825169 |
| Cold Milling Machine | BM 500/15 Stage V | 00825885 |
| Cold Milling Machine | BM 600/15 Stage V | 00825887 |
| Cold Milling Machine | BM 1000/35-2 | 00826457 |
| Cold Milling Machine | BM 500/15-2 | 00826459 |
| Cold Milling Machine | BM2000/65 Stage V | 00826467 |
| Cold Milling Machine | BM 600/15-2 | 00826479 |
| Cold Milling Machine | BM1200/35-2 | 00826485 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
