Bomag 07230692 Socket Head Cap Screw

The Bomag 07230692 Socket Head Cap Screw is a genuine OEM fastener designed for an exceptionally broad range of Bomag equipment, including cold milling machines, pavers, single drum rollers, tandem rollers, tampers, vibratory plates, refuse and landfill compactors, a trench compactor, a recycler/stabilizer, a pneumatic tyred roller, walk-behind rollers, and soil compactors. Sourced directly from Bomag, this socket head cap screw matches the original design specification, ensuring consistent torque retention and proper joint integrity across every application. Verified under part number 07230692, this fastener is a straight drop-in replacement requiring only standard hex-key tooling for installation. Whether you are servicing BM-series cold milling machines, BW-series rollers, BF-series pavers, BT-series tampers, BPR-series reversible vibratory plates, or BC-series compactors, this genuine OEM component delivers the exacting fit the original assembly demands.

Key Features

• Genuine OEM Fastener Integrity — manufactured to Bomag's original torque and thread specification, maintaining correct clamping force and joint strength in safety-critical and high-vibration assemblies alike
• Hex-Key Drive for Precise Installation — the recessed socket head allows high-torque application with a standard Allen/hex key, enabling accurate tightening in confined or recessed mounting locations common across Bomag equipment
• Exceptionally Wide Bomag Compatibility — fits cold milling machines including the BM 500/15, BM 1000/35, BM 1200/35, BM 1300/35, BM 2000/75, BM 2500/75 and more; pavers including BF 600P HSE, BF 300 P S340-2 TV and related models; single drum rollers across the BW 124, BW 145, BW 177, BW 212, BW 213, BW 216, BW 219, BW 225, BW 226 series; tandem rollers including the BW 100 AD-5, BW 120 AD-5, BW 141 AD-5, BW 151 AD-5, BW 161 AD-5, BW 190 AD-5, BW 191 AD-5, BW 202 AD-5, BW 206 AD-5; tampers including BT 50, BT 55, BT 58, BT 60, BT 65, BT 70, BT 75, BT 80 D, BVT 65; reversible vibratory plates across the BPR 25, BPR 30, BPR 35, BPR 40, BPR 45, BPR 50, BPR 55, BPR 60, BPR 65 and BPH 80/65 families; forward vibratory plates including BP 10/36, BP 15/45, BP 18/45, BP 20/45, BP 20/50, BP 25/48, BP 25/50, BP 50/55 HE, BVP 18/45 D; refuse and landfill compactors including BC 473 RB-3, BC 571 RB, BC 601 RB, BC 601 RS, BC 670 RB, BC 671 RB, BC 671 RS, BC 672 RB, BC 771 RB, BC 771 RS; the BC 473 EB-3 soil compactor; the BMP 851 trench compactor; the MPH 600 recycler/stabilizer; pneumatic tyred rollers BW 24 R and C 560 B; walk-behind rollers BW 71 E-2, BW 71 EHB-2, BW 75 AD-2; and the BW 900 AD tandem roller
• Vibration-Resistant Joint Security — a properly torqued socket head cap screw maintains component alignment and prevents loosening under the sustained vibration loads that Bomag compaction and milling equipment generates during operation; a missing or under-torqued fastener can cause component shift, accelerated wear, or structural failure
• Direct OEM Cross-Reference — order by part number 07230692 with confidence; this is the same fastener Bomag specifies in its service documentation, eliminating guesswork when ordering replacement hardware

A socket head cap screw is a precision threaded fastener with a cylindrical head and an internal hex (Allen) drive socket. It is used throughout machine assemblies where high clamping strength is needed in tight or recessed spaces that do not allow a conventional hex-head wrench. On Bomag equipment, fasteners of this type secure covers, housings, hydraulic components, structural brackets, and drive assemblies that must remain firmly located under continuous vibration, impact, and load cycling. When a socket head cap screw loosens, stretches, or shears, the components it joins can shift or separate, leading to misalignment, fluid leaks, or mechanical damage that compounds quickly in service. Replacing worn or damaged fasteners with the correct genuine OEM specification screw restores the joint to its designed clamping load and protects the surrounding assembly.

Part Details

Compatibility & Fitment

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.