The Bomag 05710971 Starter is a genuine OEM component designed for a wide range of Bomag heavy equipment, including BM 2000/60 and BM 2000/60-2 cold milling machines, BC-series refuse/landfill compactors, BC-series soil compactors, and MPH-series recyclers/stabilizers. Sourced directly from Bomag, this starter delivers an exact OEM match in form, fit, and electrical specification. Confirmed fitment spans models including the BC 670 RB, BC 672 RB, BC 671 RB, BC 671 RS, BC 772 RB, BC 772 RS, BC 972 RB, BC 1172 RB, BC 772 EB-2, BC 672 EB-2, MPH 121, MPH 122, MPH 122-2, and MPH 125, among others. When your machine won't turn over, replacing a worn or failed starter with the correct OEM part gets your equipment back in service without guesswork.
Key Features
- OEM Electrical Specification — matched to Bomag's original torque output, voltage rating, and pinion engagement spec so the engine cranks with the same authority as it did from the factory
- Direct Bolt-On Replacement — mounts to the same bolt pattern and connects to the same wiring harness as the original, with no modifications to the mounting block or electrical circuit
- Broad Bomag Fleet Coverage — fits BM 2000/60 and BM 2000/60-2 cold milling machines, BC-series refuse/landfill compactors (including BC 571 RB, BC 670 RB, BC 772 RB, BC 972 RB, BC 1172 RB, BC 671 RS, BC 772 RS, and their -2 generation variants), BC 772 EB-2 and BC 672 EB-2 soil compactors, and MPH 121, MPH 122, MPH 122-2, and MPH 125 recyclers/stabilizers
- Cranking Reliability — a failing starter causes hard starts, intermittent no-crank events, and eventual full failure; a correctly functioning starter ensures the engine fires promptly under load, preserving gear and fuel system life
- Genuine Bomag Part — supplied as an authentic OEM component under part number 05710971, eliminating any risk of mismatched solenoid engagement or premature ring gear wear from an undersized or off-spec unit
The starter is the electric motor responsible for cranking the engine fast enough for combustion to begin. When the operator turns the ignition key, the starter solenoid engages the drive pinion with the engine's ring gear and draws high current from the battery to spin the engine over. A worn or failed starter presents as slow cranking, a single click with no crank, or complete electrical silence at key-on — all of which leave a heavy machine dead on site. Fitting the correct OEM-spec starter ensures reliable cold-weather cranking and protects the ring gear from damage caused by a pinion that does not engage cleanly.
Part Details
| Part Number | 05710971 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Starter |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM2000/60 | 00800623 |
| Cold Milling Machine | BM 2000/60-2 | 00800693 |
| Refuse / Landfill Compactor | BC 670 RB | 00816001, 00816004 |
| Refuse / Landfill Compactor | BC 672 RB | 00816008, 00817909 |
| Refuse / Landfill Compactor | BC 571 RB | 00816033, 00817400 |
| Refuse / Landfill Compactor | BC 671 RS | 00816304, 00817402 |
| Refuse / Landfill Compactor | BC 671 RB | 00817401 |
| Refuse / Landfill Compactor | BC 772 RB | 00817406 |
| Refuse / Landfill Compactor | BC 772 RS | 00817407 |
| Refuse / Landfill Compactor | BC 972 RB | 00817408 |
| Recycler / Stabilizer | MPH 121 | 00817587 |
| Recycler / Stabilizer | MPH 122 | 00817595 |
| Refuse / Landfill Compactor | BC 1172 RB | 00817827 |
| Recycler / Stabilizer | MPH 122-2 | 00818177 |
| Refuse / Landfill Compactor | BC 772 RB-2 | 00818179 |
| Refuse / Landfill Compactor | BC 672 RB-2 | 00818181 |
| Refuse / Landfill Compactor | BC 772 RS-2 | 00818185 |
| Soil Compactor | BC 772 EB-2 | 00818187 |
| Soil Compactor | BC 672 EB-2 | 00818189 |
| Refuse / Landfill Compactor | BC 972 RB-2 | 00818191 |
| Refuse / Landfill Compactor | BC 1172 RB-2 | 00818193 |
| Recycler / Stabilizer | MPH 125 | 00818273, 00818909 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
