The Bomag 05817701 Taper Roller Bearing is a genuine OEM component designed for Bomag BW 213, BW 214, BW 215, BW 216, BW 218, BW 219, and BW 220 series single drum rollers. Sourced directly from Bomag, this taper roller bearing carries the correct geometry, load rating, and dimensional tolerances to match the original specification. It fits across a wide range of generation variants — including -3, -4, -4i, -40, DH, PDH, DHC, and PDHC configurations — covering models such as the BW 213 DH-3, BW 213 PDH-4i, BW 216 PD-4i, and BW 220 D-40, among others. When you order using part number 05817701, you are getting the same bearing that shipped with the machine from the factory.
Key Features
- OEM-Grade Radial and Axial Load Capacity — As a genuine Bomag taper roller bearing, this component is precision-ground to handle the combined radial and thrust loads generated by single drum roller drivetrain and drum shaft assemblies, preventing premature fatigue and spalling.
- Direct Drop-In Replacement — Machined to the exact bore, outer diameter, and cone angle of the original, this bearing seats into the housing without rework, shimming, or modification to mating components.
- Broad Single Drum Roller Coverage — Fits a wide range of Bomag single drum rollers across the BW 213, BW 214, BW 215, BW 216, BW 218, BW 219, and BW 220 series, spanning generation -3 through -4i and -40 variants.
- Sustained Drivetrain Integrity — A worn or spalled taper roller bearing introduces play into the shaft assembly, causing vibration, uneven drum rotation, and accelerated wear on adjacent seals and housings. Replacing it with a correctly rated bearing restores smooth, concentric rotation.
- Verified Fitment by Bomag Part Number — Cross-reference your machine against part number 05817701 to confirm compatibility before ordering — especially important across the many DH, PDH, DHC, and PDHC sub-variants in this model family.
A taper roller bearing uses tapered inner and outer raceways with angled rollers between them, which allows it to carry both radial loads and axial (thrust) loads simultaneously — a combination found throughout the drum shaft, travel drive, and articulation assemblies of large single drum rollers. Because the rolling elements contact the raceways at a precise angle, any dimensional deviation from the original specification affects load distribution and causes uneven wear across the bearing face. When a taper roller bearing begins to fail, operators typically notice increased vibration, heat buildup at the bearing location, or audible rumbling during drum rotation; left unaddressed, a failed bearing can damage the housing bore and require significantly more involved repairs.
Part Details
| Part Number | 05817701 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Taper Roller Bearing |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Single Drum Roller | BW 213 DH-3 | 00815322, 00817526, 00817527, 00817528, 00817589 |
| Single Drum Roller | BW 216 D-3 | 00815340, 00817214, 00817535 |
| Single Drum Roller | BW 213 PDH-3 | 00817529, 00817530, 00817590 |
| Single Drum Roller | BW 214 DH-3 | 00817532, 00817592 |
| Single Drum Roller | BW 213 DH 3 VARIOCONTOL | 00817591, 00817605 |
| Single Drum Roller | BW 216 DHC-3 | 00817643, 00817644 |
| Single Drum Roller | BW 213 DH-3 USA | 00817671 |
| Single Drum Roller | BW 213 PDH-3 USA | 00817673 |
| Single Drum Roller | BW 213 PDH-40 | 00817733 |
| Single Drum Roller | BW 213 DH-4 | 00817775, 00817779, 00817781, 00818125, 00824039, 00824153 |
| Single Drum Roller | BW 213 PDH-4 | 00817777, 00818121, 00824145, 00824423 |
| Single Drum Roller | BW 213 DH-40 | 00817785 |
| Single Drum Roller | BW 214 DH-4 | 00817789, 00824147 |
| Single Drum Roller | BW 214 PDH-4 | 00817791, 00818345 |
| Single Drum Roller | BW 216 D-4 | 00817797, 00818351, 00824043 |
| Single Drum Roller | BW 219 D-4i | 00817817 |
| Single Drum Roller | BW 219 D-4 | 00817835, 00818095, 00818373, 00818853, 00824821 |
| Single Drum Roller | BW 219 PD-4 | 00817949 |
| Single Drum Roller | BW 214 DHC-4 | 00818029, 00818337 |
| Single Drum Roller | BW 213 DHC-4 | 00818031, 00818331 |
| Single Drum Roller | BW 216 PD-4 | 00818053, 00818353, 00824155 |
| Single Drum Roller | BW 213 PDHC-4 | 00818117, 00818333 |
| Single Drum Roller | BW 214 PDHC-4 | 00818119 |
| Single Drum Roller | BW213DH 40 | 00818419 |
| Single Drum Roller | BW 213 DH 4 | 00818437 |
| Single Drum Roller | BW 216 D-40 | 00818611 |
| Single Drum Roller | BW 216 PD-40 | 00818653 |
| Single Drum Roller | BW 218 D-40 | 00818671 |
| Single Drum Roller | BW 220 D-4 | 00818989 |
| Single Drum Roller | BW 215 D-40 | 00824167 |
| Single Drum Roller | BW 213 DH-4 EU-Flex | 00824433 |
| Single Drum Roller | BW 213 DH-4i | 00824445, 00824673 |
| Single Drum Roller | BW 213 PDH-4i | 00824455, 00824685 |
| Single Drum Roller | BW 214 DH-4i | 00824459 |
| Single Drum Roller | BW 216 D-4i | 00824463, 00824693 |
| Single Drum Roller | BW 214 DH-4 EU Flex | 00824565 |
| Single Drum Roller | BW 213 DH 4I | 00824677 |
| Single Drum Roller | BW 216 PD-4i | 00824697 |
| Single Drum Roller | BW 220 D-40 | 00824803, 00824989 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
