The Bomag 05716634 Tappet is a genuine OEM component designed for Bomag cold milling machines, refuse and landfill compactors, soil compactors, and recycler/stabilizers spanning the BM, BC, and MPH model families. Sourced directly from Bomag, this tappet meets the same specifications as the part originally installed at the factory. This tappet fits a wide range of machines including the BM 2000/60, BM 2000/60-2, BC 672 RB, BC 772 RB, BC 972 RB, BC 1172 RB, BC 672 EB-2, BC 772 EB-2, MPH 122-2, MPH 125, MPH 600, MPH 600 3B/4i-PB, and MPH 600 EU-FLEX. Ordering by part number 05716634 ensures you receive the correct component verified against Bomag's own catalog.
Key Features
- Genuine OEM Valve Train Precision — manufactured to Bomag's exact tolerances for consistent lift height, surface hardness, and cam contact geometry, which are critical for proper valve actuation in high-load diesel engines.
- Direct Drop-In Replacement — matches the original tappet bore diameter and seating profile so this tappet installs directly into the engine block without machining or adaptation.
- Broad Fleet Coverage — fits Bomag BM-series cold milling machines, BC-series refuse/landfill compactors, BC-series soil compactors, and MPH-series recycler/stabilizers, including BM 2000/60, BC 1172 RB, and MPH 600 variants.
- Sustained Engine Efficiency — a correctly seated tappet maintains proper valve timing and compression, keeping the engine running at rated power output across demanding milling, compaction, and stabilization cycles.
- Wear Resistance Where It Counts — OEM-grade surface treatment on the cam contact face resists scuffing and pitting, extending service intervals and reducing the risk of premature camshaft wear.
A tappet — also called a valve lifter — is the component that sits between the camshaft and the valve stem (or pushrod) inside the engine. As the camshaft rotates, each lobe pushes against the tappet to open the corresponding intake or exhaust valve at precisely the right moment in the combustion cycle. When a tappet wears flat, develops pitting on its contact face, or loses correct clearance, valve timing drifts, compression drops, and the engine produces less power while consuming more fuel. In severe cases, a failed tappet can accelerate camshaft lobe wear and lead to costly internal engine damage — making timely replacement with a correct-spec part essential for keeping heavy equipment like cold milling machines and large compactors operating at full capacity.
Part Details
| Part Number | 05716634 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Tappet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM2000/60 | 00800623 |
| Cold Milling Machine | BM 2000/60-2 | 00800693, 00800695 |
| Refuse / Landfill Compactor | BC 772 RB | 00817406 |
| Refuse / Landfill Compactor | BC 772 RS | 00817407 |
| Refuse / Landfill Compactor | BC 972 RB | 00817408 |
| Refuse / Landfill Compactor | BC 1172 RB | 00817827 |
| Refuse / Landfill Compactor | BC 672 RB | 00817909 |
| Recycler / Stabilizer | MPH 122-2 | 00818177, 00818727, 00818911, 00824987 |
| Refuse / Landfill Compactor | BC 772 RB-2 | 00818179, 00818885, 00818933, 00824639 |
| Refuse / Landfill Compactor | BC 672 RB-2 | 00818181, 00818887, 00818931, 00824641 |
| Refuse / Landfill Compactor | BC 772 RS-2 | 00818185, 00818895, 00824643 |
| Soil Compactor | BC 772 EB-2 | 00818187, 00818897 |
| Soil Compactor | BC 672 EB-2 | 00818189 |
| Refuse / Landfill Compactor | BC 972 RB-2 | 00818191, 00818701, 00818889 |
| Refuse / Landfill Compactor | BC 1172 RB-2 | 00818193, 00818703, 00818891 |
| Recycler / Stabilizer | MPH 125 | 00818273, 00818681, 00818909 |
| Recycler / Stabilizer | MPH 600 | 00824099 |
| Recycler / Stabilizer | MPH 600 3B/4i-PB | 00824645 |
| Recycler / Stabilizer | MPH 600 EU-FLEX | 00824751 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
