The Bomag 80100110 Tension Spring is a genuine OEM component designed for a wide range of Bomag tandem rollers, walk-behind rollers, pneumatic tyred rollers, and cold milling machines. As a direct OEM replacement, this tension spring is manufactured to the exact specifications Bomag requires, ensuring a drop-in fit with no guesswork on compatibility. This spring is confirmed to fit models including the BW 90 AD, BW 100 AD-4, BW 120 AD-4, BW 125 AD-4, BW 24 RH, BW 27 RH, BW 28 RH, BW 71 E, BW 900-2, BW177PDH 5, and cold milling machines such as the BM 1000/35, BM 1200/35, and BM 1300/35, among others. When you need an exact-match spring that holds up to the demands of daily compaction and milling work, this OEM part is the correct choice.
Key Features
- OEM Spring Rate and Geometry — manufactured to Bomag's exact tension, coil pitch, and hook dimensions so this spring delivers the correct load characteristics right out of the box
- Direct Replacement Fit — engineered to install in the same mounting points as the original, covering tandem rollers, walk-behind rollers, pneumatic tyred rollers, and cold milling machines without modification
- Broad Compatibility — fits an extensive range of Bomag equipment including BW 90 AD, BW 100 AD-4, BW 120 AD-4, BW 125 AD-4, BW 24 RH, BW 27 RH, BW 28 RH, BW 71 E, BW 900-2, BW177PDH 5, BM 1000/35, BM 1200/35, BM 1300/35, and additional variants across the BW and BM families
- Consistent Clamping and Return Force — a correctly tensioned spring maintains proper component engagement; a fatigued or broken spring can cause erratic control response or loss of preload on linked assemblies
- Genuine Bomag Part — supplied under part number 80100110 directly from the Bomag OEM supply chain, giving you full confidence in material grade, heat treatment, and surface finish
A tension spring stores and releases mechanical energy to hold components under a controlled pulling load or to return a moving part to its resting position. On Bomag rollers and cold milling machines, tension springs are commonly used in linkages, throttle and control assemblies, and mechanical return mechanisms where consistent spring force keeps components properly engaged during operation. When a tension spring loses its rated load capacity through fatigue, corrosion, or breakage, the affected assembly may become sluggish, fail to return to neutral, or lose the clamping force needed to operate safely — making timely replacement with the correct OEM spring essential to keeping controls and linkages responding as designed.
Part Details
| Part Number | 80100110 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Tension Spring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Tandem Roller | BW 90 AD | 00810081 |
| Tandem Roller | BW 80 AD-2 | 00810280, 00817566 |
| Tandem Roller | BW 90 AD-2 | 00810281, 00817569, 00818041, 00818507 |
| Tandem Roller | BW 100 ADM-2 | 00817459 |
| Walk-Behind / Light Roller | BW 71 E-2 | 00817562, 00818081, 00818463, 00818769, 00824551, 00824783, 00825515, 00825901, 00826209, 00826535 |
| Tandem Roller | BW 80 ADS | 00817567, 00818513 |
| Tandem Roller | BW 90 AC-2 | 00817568, 00818045 |
| Walk-Behind / Light Roller | BW 71 EHB-2 | 00817601, 00818083 |
| Tandem Roller | BW 100 AD-4 | 00817685, 00818465, 00824271, 00824273 |
| Tandem Roller | BW 100 AC-4 | 00817687, 00818467, 00818731 |
| Tandem Roller | BW 120 AD-4 | 00817689, 00818377, 00818469, 00818477, 00818593, 00818733, 00824173 |
| Tandem Roller | BW 120 AC-4 | 00817691, 00818471, 00818597 |
| Pneumatic Tyred Roller | BW 24 RH | 00817755, 00818457, 00818949, 00818951, 00824405 |
| Pneumatic Tyred Roller | BW 27 RH | 00817757, 00818315, 00818953, 00818997, 00824407 |
| Walk-Behind / Light Roller | BW 900-2 | 00817821, 00818363 |
| Tandem Roller | BW 125 AD-4 | 00817937, 00818473 |
| Tandem Roller | BW 125 AC-4 | 00818271, 00818475 |
| Pneumatic Tyred Roller | BW24RH | 00818279, 00818691 |
| Single Drum Roller | BW177PDH 5 | 00818281 |
| Pneumatic Tyred Roller | BW 25 RH | 00818321 |
| Tandem Roller | BW120AD 4 | 00818595, 00818871 |
| Tandem Roller | BW 90 AD-5 | 00818709 |
| Tandem Roller | BW 100 ADM-5 | 00818711 |
| Tandem Roller | BW 100 SC-5 | 00818715 |
| Pneumatic Tyred Roller | BW 27 RH-4i | 00824131, 00824409 |
| Cold Milling Machine | BM 1000/35 | 00824229, 00824569, 00824795 |
| Cold Milling Machine | BM 1200/35 | 00824533, 00824631, 00824797 |
| Cold Milling Machine | BM 1300/35 | 00824535, 00824633, 00824799 |
| Pneumatic Tyred Roller | BW 27 RH-4i BC | 00824723 |
| Pneumatic Tyred Roller | BW 28 RH | 00824957, 00826041, 00826173, 00826175, 00826177 |
| Cold Milling Machine | BM 1200/35 T4f | 00825167 |
| Cold Milling Machine | BM 1300/35 T4f | 00825169 |
| Cold Milling Machine | BM 1000/35-2 | 00826457 |
| Cold Milling Machine | BM1200/35-2 | 00826485 |
| Cold Milling Machine | BM1000/35-2 | 00826489 |
| Pneumatic Tyred Roller | BW28RH | 00826695 |
| Walk-Behind / Light Roller | BW 71 E | 00811030, 00811013, 00817561 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
