The Bomag 06052912 Turbocharger is a genuine OEM Turbocharger designed for the BM 2000/75, BM 2200/75, and BM 2500/75 cold milling machines. Sourced directly from Bomag, this turbocharger delivers an exact match to the original component in geometry, boost characteristics, and mounting configuration. It installs directly in place of the factory unit with no modifications to the engine bay or exhaust plumbing. If your milling machine is showing signs of reduced power output, excessive smoke, or sluggish response, replacing the turbocharger with a genuine part number 06052912 is the correct first step toward restoring full engine performance.
Key Features
- Genuine OEM Boost Integrity — matched to the exact compressor wheel trim and turbine housing spec of the original, preserving the engine's rated power and torque output on your cold milling machine
- Direct Bolt-On Replacement — flanges, oil feed and drain ports, and exhaust inlet dimensions match the factory turbocharger on the BM 2000/75, BM 2200/75, and BM 2500/75, so this component seats correctly without reworking fittings or brackets
- Confirmed Fitment Across the BM 75-Series Milling Line — verified for the BM 2000/75, BM 2200/75, and BM 2500/75 cold milling machines, covering the full 75-series cutting-width lineup
- Restored Engine Responsiveness — a properly functioning turbocharger maintains correct air-fuel ratio under load, supporting consistent cutting depth, drum speed, and forward travel on demanding milling passes
- Fuel System Safety Compliance — an OEM-spec unit maintains correct exhaust backpressure and oil drain flow, reducing the risk of oil ingestion or turbo seal failure that can contaminate the intake and damage the engine
A turbocharger forces compressed air into the engine's combustion chambers, allowing the engine to burn more fuel per cycle and produce significantly more power than a naturally aspirated unit of the same displacement. On a large cold milling machine, the turbocharger is under sustained high load during cutting operations, and its condition directly affects drum torque, engine temperature, and fuel efficiency. When the turbocharger wears or fails — through bearing failure, compressor wheel damage, or seal degradation — the engine loses boost pressure, output drops noticeably, and oil consumption typically rises. Replacing the unit promptly with a genuine Bomag turbocharger keeps the engine operating within its design parameters and protects downstream components from the damage a failing turbo can cause.
Part Details
| Part Number | 06052912 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Turbocharger |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cold Milling Machine | BM 2000/75 | 00824741 |
| Cold Milling Machine | BM 2200/75 | 00824801 |
| Cold Milling Machine | BM 2500/75 | 00826375 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
