The Bomag 09510085 Cock Valve is a genuine OEM component designed for a wide range of Bomag cold milling machines, recycler/stabilizers, and tandem rollers — including the BM 500/15, BM 600/15, BM 1000/35, BM 1200/35, BM 1300/35, BM 2000/75, BM 2200/75, and BM 2500/75 cold milling machines, the MPH 364-2, MPH 600, and MPH 600 3B/4i-PB recycler/stabilizers, the RS 360 TIER-4F, RS 460, RS 460 STAGE V, RS 500, and RS 650 recycler/stabilizers, and the BW 131 ACW-2 and BW 131 AD-2 tandem rollers. Sourced directly from Bomag, this part carries the same fit, finish, and specification as the valve installed at the factory. When a fluid control component fails in the field, swapping in part number 09510085 restores correct flow management quickly and with confidence.
Key Features
- Genuine OEM Fluid Control — manufactured by Bomag to the exact tolerances required for precise on/off flow regulation in hydraulic and fluid circuit applications on heavy milling and stabilizing equipment.
- Direct Drop-In Replacement — this cock valve matches the original port sizing, thread spec, and body geometry, allowing straightforward installation without rework or adaptation.
- Broad Confirmed Fitment — verified for BM-series cold milling machines, MPH and RS recycler/stabilizers, and BW 131-series tandem rollers across multiple generation variants, including Stage V and Tier 4 Final configurations.
- Maintains Fluid System Integrity — a failed or leaking cock valve can cause uncontrolled fluid flow, pressure loss, or contamination in the circuit; this genuine replacement restores leak-free shutoff and full system control.
- Fuel and Fluid System Safety — cock valves used in fuel or coolant circuits are a safety-critical shutoff point; using an OEM-specified part ensures the valve seats and seals correctly under operating pressure and temperature.
A cock valve is a simple quarter-turn or rotary shutoff device installed in a fluid line — fuel, coolant, hydraulic, or water — to control whether flow is permitted or blocked. On large cold milling machines and recycler/stabilizers, these valves are used at key service and operational points in the fluid circuit, allowing operators or technicians to isolate sections of the system for maintenance or to regulate flow during operation. When a cock valve wears, cracks, or fails to seat fully, it can result in fluid leaks, unintended flow, or an inability to properly shut down a circuit — each of which can interrupt machine operation or create a hazardous condition on the jobsite.
Part Details
| Part Number | 09510085 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Cock Valve |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Tandem Roller | BW 131 ACW-2 | 00817468 |
| Tandem Roller | BW 131 AD-2 | 00817469 |
| Cold Milling Machine | BM 600/15 | 00818099, 00818175 |
| Cold Milling Machine | BM 500/15 | 00818173, 00818873, 00824553 |
| Recycler / Stabilizer | MPH 600 | 00824097 |
| Cold Milling Machine | BM 1000/35 | 00824229, 00824569, 00824795 |
| Cold Milling Machine | BM 1200/35 | 00824533, 00824631, 00824797 |
| Cold Milling Machine | BM 1300/35 | 00824535, 00824633, 00824799 |
| Cold Milling Machine | BM 500/15 EU-Flex | 00824539 |
| Recycler / Stabilizer | MPH 600 3B/4i-PB | 00824645 |
| Cold Milling Machine | BM 2000/75 | 00824741 |
| Cold Milling Machine | BM 500 15 P8 | 00824743 |
| Cold Milling Machine | BM600 /15 | 00824745 |
| Recycler / Stabilizer | MPH 600 EU-FLEX | 00824751 |
| Recycler / Stabilizer | RS 500 | 00824753, 00824755 |
| Cold Milling Machine | BM 2200/75 | 00824801 |
| Recycler / Stabilizer | RS 460 | 00824809, 00825187, 00825189 |
| Cold Milling Machine | BM 600/15 EU-Flex | 00824943 |
| Recycler / Stabilizer | MPH 364-2 | 00824973 |
| Recycler / Stabilizer | RS 360 TIER-4F | 00825055 |
| Cold Milling Machine | BM 600/15 EU-Flex T4i | 00825065 |
| Recycler / Stabilizer | RS 650 | 00825131 |
| Cold Milling Machine | BM 1200/35 T4f | 00825167 |
| Cold Milling Machine | BM 1300/35 T4f | 00825169 |
| Recycler / Stabilizer | RS460 STAGE V | 00825263 |
| Cold Milling Machine | BM 2000/75 TE | 00825881 |
| Cold Milling Machine | BM 500/15 Stage V | 00825885 |
| Cold Milling Machine | BM 600/15 Stage V | 00825887 |
| Cold Milling Machine | BM 2500/75 | 00826375 |
| Cold Milling Machine | BM 1000/35-2 | 00826457 |
| Cold Milling Machine | BM 500/15-2 | 00826459 |
| Cold Milling Machine | BM2000/65 Stage V | 00826467 |
| Cold Milling Machine | BM2200/65 Stage V | 00826469 |
| Cold Milling Machine | BM 600/15-2 | 00826479 |
| Cold Milling Machine | BM1200/35-2 | 00826485 |
| Cold Milling Machine | BM1000/35-2 | 00826489 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
