The Bomag 05570717 Wire Harness is a genuine OEM component designed for Bomag BC-series refuse/landfill compactors and soil compactors. This wire harness delivers the correct connector layout, circuit routing, and insulation specification required by the machine's electrical system, covering a broad range of BC-family models including the BC 572 RB-2, BC 672 RB-2, BC 772 RB-2, BC 772 RB-3, BC 772 RB-4, BC 972 RB-2, BC 972 RB-4, BC 1172 RB-2, BC 1172 RB-3, BC 1172 RB-4, BC 772 RS-2, BC 772 RS-3, BC 772 RS-4, BC 473 RB-3, BC 473 RB-4, BC 473 RS-4, BC 672 RB-3, BC 672 RB-4, BC 972 RB-3, BC 473 EB-3, BC 473 EB-4, BC 672 EB-2, BC 772 EB-2, and BC 772 EB-4. Sourced directly from Bomag, this part meets the same production standards as the harness installed at the factory, ensuring every circuit path, terminal, and protective sleeve matches the original design without adaptation.
Key Features
- OEM-Matched Wiring Specification — produced to Bomag's exact circuit layout, terminal sizing, and insulation grade, so every connection in the harness carries the correct load without risk of voltage drop or pin misalignment
- Direct Connector and Routing Fit — all plugs, grommets, and branch points align to the machine's original mounting and pass-through locations, allowing the harness to seat fully without rerouting or splicing
- Broad BC-Series Coverage — fits refuse/landfill compactor models including the BC 472 through BC 1172 RB/RS generations and soil compactor variants including the BC 473 EB-3, BC 473 EB-4, BC 672 EB-2, BC 772 EB-2, and BC 772 EB-4
- Electrical System Integrity Restored — a damaged or degraded wire harness can trigger sensor faults, disable controls, or cause intermittent shutdowns; replacing it with the correct OEM harness restores stable communication between the machine's control units and operating systems
- Electrical Safety Compliance — correct insulation ratings and strain-relief points prevent shorts, chafing failures, and ground faults that can create fire risk or damage control modules in high-cycle compactor operation
The wire harness is the central electrical backbone of the machine, bundling and routing power and signal circuits between the engine, hydraulic controls, sensors, and operator displays. On heavy-duty compactors like the BC-series, the harness is exposed to constant vibration, heat cycles, and debris, which can cause insulation cracking, terminal corrosion, or broken conductors over time. When a harness degrades, the result is often erratic sensor readings, control system faults, or complete loss of function in one or more machine circuits — restoring it with part number 05570717 brings the electrical system back to its original designed state.
Part Details
| Part Number | 05570717 |
|---|---|
| Brand | Bomag |
| Part Type | Genuine OEM |
| Description | Wire Harness |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Refuse / Landfill Compactor | BC 1172 RB-3 | 00818153 |
| Refuse / Landfill Compactor | BC 772 RB-2 | 00818179, 00818885, 00818933, 00824639 |
| Refuse / Landfill Compactor | BC 572 RB-2 | 00818183, 00818893, 00824257 |
| Refuse / Landfill Compactor | BC 772 RS-2 | 00818185, 00818895, 00824643 |
| Soil Compactor | BC 772 EB-2 | 00818187, 00818897 |
| Soil Compactor | BC 672 EB-2 | 00818189 |
| Refuse / Landfill Compactor | BC 972 RB-2 | 00818191, 00818701, 00818889 |
| Refuse / Landfill Compactor | BC 1172 RB-2 | 00818193, 00818703, 00818891 |
| Refuse / Landfill Compactor | BC 672 RB-2 | 00818887, 00818931, 00824641 |
| Refuse / Landfill Compactor | BC 972 RB-3 | 00824085 |
| Refuse / Landfill Compactor | BC 772 RB-3 | 00824101 |
| Refuse / Landfill Compactor | BC 672 RB-3 | 00824259 |
| Refuse / Landfill Compactor | BC 772 RS-3 | 00824349 |
| Refuse / Landfill Compactor | BC 772 RB-4 | 00824355 |
| Refuse / Landfill Compactor | BC 473 RB-4 | 00824525 |
| Refuse / Landfill Compactor | BC 473 RS-4 | 00824527 |
| Refuse / Landfill Compactor | BC 772 RS-4 | 00824529 |
| Refuse / Landfill Compactor | BC 672 RB-4 | 00824531 |
| Soil Compactor | BC 473 EB-4 | 00824855 |
| Soil Compactor | BC 772 EB-4 | 00824857 |
| Refuse / Landfill Compactor | BC 972 RB-4 | 00824899 |
| Refuse / Landfill Compactor | BC 1172 RB-4 | 00824901 |
| Refuse / Landfill Compactor | BC 473 RB-3 | 00825083 |
| Soil Compactor | BC 473 EB-3 | 00825137 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.