The Genie 6833GT is a genuine OEM Rubber Cushion Clamp, 0.50, #8 x 1/4 designed for an exceptionally broad range of Genie aerial work platforms and support equipment. As a factory-original component, this clamp meets the same specifications used in original assembly — ensuring a direct, confident installation every time. Part number 6833GT fits GS scissor lifts, S and SX telescopic boom lifts, Z and ZX articulating boom lifts, AWP, IWP, and DPL push-around personnel lifts, GR and GRC vertical mast lifts, QS stock-picking lifts, and TML light towers. Cross-reference 6833GT against your parts manual to confirm the correct application for your specific unit before ordering.
Key Features
- Genuine OEM Construction: — Vulcanized rubber cushion bonded to a formed steel shell delivers the vibration isolation and clamping force Genie specifies at the factory — not an approximation of it.
- Exact-Match Installation: — The #8 x 1/4 mounting footprint and 0.50-inch bore align directly with original bracket and hose routing positions, so the clamp seats without reworking surrounding hardware.
- Exceptionally Wide Fitment: — A single part number spans GS scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, AWP/IWP/DPL personnel lifts, GR/GRC/QS mast lifts, and TML light towers — making it a practical stock item for mixed fleets.
- Protects Hoses and Lines from Abrasion: — The rubber cushion isolates hydraulic hoses, wiring harnesses, or tubing from metal contact, preventing chafing, cracking, and fatigue failures that lead to leaks or electrical faults.
- Vibration Damping for Long Service Life: — By absorbing operational vibration at the clamp rather than transferring it to the line, this component extends the service life of the hoses and cables it secures.
- Operational Safety for Hydraulic and Electrical Routing: — On aerial lifts, a failed or missing clamp can allow hydraulic lines or control wiring to shift, abrade, or leak — making correct clamping a genuine safety and compliance consideration.
A rubber cushion clamp secures hydraulic hoses, electrical conduit, or tubing to a structural surface while providing a soft, non-abrasive interface between the line and the mounting point. The rubber insert absorbs vibration and prevents metal-on-hose contact that would otherwise cause chafing or premature wear. When this type of clamp is missing, loose, or cracked, the lines it supports are left free to move under load and vibration — accelerating wear and increasing the risk of leaks or wiring damage that can take a machine out of service.
Part Details
| Part Number | 6833GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Rubber Cushion Clamp, 0.50, #8 x 1/4 |
Compatibility & Fitment
| Name | Model |
|---|---|
| TML-4000 | TML-4000 |
| TML-4000N | TML-4000N |
| AWP Super Series | AWP Super Series |
| GRC-12 | GRC-12 |
| QS-12R | QS-12R |
| QS-15R | QS-15R |
| QS-20R | QS-20R |
| QS-12W | QS-12W |
| QS-15W | QS-15W |
| QS-20W | QS-20W |
| IWP Super Series | IWP Super Series |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| AWP Super | AWP Super |
| CWP Super Series | CWP Super Series |
| DPL-25S | DPL-25S |
| DPL-30S | DPL-30S |
| DPL-35S | DPL-35S |
| GR-8 | GR-8 |
| PLC PLI | PLC PLI |
| AWP | AWP |
| IWP | IWP |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| SX-150 | SX-150 |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-4047 | GS-4047 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-62/40 | Z-62/40 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-34/22 IC | Z-34/22 IC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/22 | Z-45/22 |
| Z-34 IC | Z-34 IC |
| Z-30/20HD | Z-30/20HD |
| Z-30/20 | Z-30/20 |
| Z-45/22 MP | Z-45/22 MP |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
