The Genie 48933GT is a genuine OEM Connector designed for a wide range of Genie telescopic booms, articulating booms, scissor lifts, and telehandlers. As a direct factory-sourced component, this connector meets the exact specifications Genie engineers built into the original wiring harness or hydraulic circuit, ensuring a proper interface and dependable signal or fluid path. This part fits an extensive lineup including S and SX series telescopic boom lifts, Z and ZX series articulating boom lifts, GS series scissor lifts, and GTH series telehandlers — cross-reference part number 48933GT against your machine's parts manual to confirm application before ordering.
Key Features
- Factory-Matched Connector Spec — Sourced directly from Genie, this connector carries the original dimensional and pin-configuration spec, so termination points seat correctly without reworking adjacent wiring or porting.
- Direct Installation — Engineered to mate with the existing harness or circuit interface on compatible machines, allowing a straightforward swap-out during scheduled service or unplanned repair.
- Broad Genie Fleet Coverage — Fits S and SX telescopic boom lifts, Z and ZX articulating boom lifts, GS scissor lifts, and GTH telehandlers, making this a versatile stocking part for mixed Genie fleets.
- Supports Consistent Electrical or Hydraulic Integrity — A correctly seated connector maintains a clean, uninterrupted circuit or sealed fluid path; a damaged or corroded connector can cause intermittent faults, control errors, or fluid weepage that ground a machine.
- Operational Safety Relevance — On aerial-lift platforms, connector integrity is directly tied to control-system reliability. A failed connection can disable safety-critical functions, making like-for-like OEM replacement the correct choice for compliance and operator safety.
A connector serves as the interface point between two sections of a wiring harness, hydraulic line, or control circuit — it allows assemblies to be joined securely and separated cleanly during service without cutting or splicing. On aerial lifts and telehandlers, connectors carry signals for platform controls, safety sensors, and drive functions, meaning a cracked housing, corroded pin, or loose locking collar can produce anything from a nuisance fault code to a full loss of function. Replacing a worn or damaged connector with the correct OEM part restores the integrity of that interface and eliminates the risk of intermittent faults caused by an improperly matched substitute.
Part Details
| Part Number | 48933GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Connector, 520120-8*** |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| SX-150 | SX-150 |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-2669DC | GS-2669DC |
| GS-3369DC | GS-3369DC |
| GS-4069DC | GS-4069DC |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| GS-2668 RT | GS-2668 RT |
| GS-3268 RT | GS-3268 RT |
| GS-2668 DC | GS-2668 DC |
| GS-3268 DC | GS-3268 DC |
| GTH-1048 | GTH-1048 |
| GTH-1056 | GTH-1056 |
| GTH-636 | GTH-636 |
| GTH-844 | GTH-844 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z33/18 | Z33/18 |
| Z-62/40 | Z-62/40 |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-34/22 IC | Z-34/22 IC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-33 DC Power | Z-33 DC Power |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/22 | Z-45/22 |
| Z-34 IC | Z-34 IC |
| Z-25/8 | Z-25/8 |
| Z-20/8 | Z-20/8 |
| Z-20/8N | Z-20/8N |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
