The Genie 7056GT is a genuine OEM Squeeze Connector, 1/2NPT designed for an exceptionally broad range of Genie aerial work platforms, scissor lifts, boom lifts, and personnel lifts. As a direct OEM replacement, this connector is built to the same specifications as the original installed at the factory, ensuring a proper fit across compatible machines. Part number 7056GT covers fitment on Genie AWP, IWP, DPL, and GR push-around and vertical mast lifts, GS scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, TZ and TMZ trailer-mounted booms, and Genie material lift lines including the Superlift and Powered Superlift. Cross-reference 7056GT against your parts manual to confirm applicability for your specific serial number and configuration before ordering.
Key Features
- Genuine OEM Construction: — Manufactured to Genie's original connector specification, delivering the correct cable range retention (0.38–0.50) and thread engagement that aftermarket alternatives may not match.
- Correct 1/2NPT Thread Form: — The 1/2NPT thread profile seats flush and seals securely in the original port, eliminating the risk of cross-threading or misaligned connections during installation.
- Exceptionally Wide Compatibility: — Fits Genie GS scissor lifts, S and SX telescopic boom lifts, Z and ZX articulating booms, TZ and TMZ trailer booms, AWP, IWP, DPL, GR, and Genie material lift lines — a single part number covering a large installed fleet.
- Maintains Wiring Integrity: — A properly functioning squeeze connector secures conductors firmly within the connector body, preventing intermittent electrical faults that can trigger fault codes or disable machine functions.
- Operational Safety on Aerial Equipment: — On aerial lifts, a failed or loose electrical connector can interrupt control signals to critical functions including drive, lift, and emergency lowering systems, making connector integrity a direct safety consideration.
A squeeze connector is a cable-entry fitting that clamps onto the outer jacket of a wire or cable as it enters an electrical enclosure, junction box, or conduit fitting. The threaded 1/2NPT body screws into the enclosure wall while the internal squeeze mechanism grips the cable jacket, providing both a secure mechanical anchor and protection against abrasion at the entry point. When this connector loosens, wears, or cracks, cables can shift under vibration, exposing conductors to chafing or moisture ingress that leads to shorts, intermittent faults, or complete circuit failure — all of which can take a machine out of service unexpectedly. Replacing a damaged or missing connector with the correct OEM part restores the cable's protected pathway and keeps the wiring harness properly anchored through the demanding vibration and temperature cycles common to aerial lift operation.
Part Details
| Part Number | 7056GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Squeeze Connector, 1/2NPT, 0.38-0.50, SM |
Compatibility & Fitment
| Name | Model |
|---|---|
| AWP Super Series | AWP Super Series |
| Genie Lift | Genie Lift |
| QS-12R | QS-12R |
| QS-15R | QS-15R |
| QS-20R | QS-20R |
| QS-12W | QS-12W |
| QS-15W | QS-15W |
| QS-20W | QS-20W |
| IWP Super Series | IWP Super Series |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| GR-20J | GR-20J |
| GR-26J | GR-26J |
| Genie Powered Superlift | Genie Powered Superlift |
| AWP Super | AWP Super |
| CWP Super Series | CWP Super Series |
| DPL-25S | DPL-25S |
| DPL-30S | DPL-30S |
| DPL-35S | DPL-35S |
| GR-8 | GR-8 |
| Easy-Up AC Power | Easy-Up AC Power |
| Easy-Up DC Power | Easy-Up DC Power |
| DPL | DPL |
| PLC PLI | PLC PLI |
| AWP | AWP |
| IWP | IWP |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| SX-150 | SX-150 |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-2669DC | GS-2669DC |
| GS-3369DC | GS-3369DC |
| GS-4069DC | GS-4069DC |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-4047 | GS-4047 |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| GS-4655 | GS-4655 |
| GS-4046 | GS-4046 |
| GS-2646 AV | GS-2646 AV |
| GS-2646 AV35 | GS-2646 AV35 |
| GS-2668 RT | GS-2668 RT |
| GS-3268 RT | GS-3268 RT |
| GS-2668 DC | GS-2668 DC |
| GS-3268 DC | GS-3268 DC |
| GS-30 | GS-30 |
| GS-32 | GS-32 |
| GS-46 | GS-46 |
| TZ-34/20 | TZ-34/20 |
| TZ-50/30 | TZ-50/30 |
| TZ-50 | TZ-50 |
| TMZ-34/19 | TMZ-34/19 |
| TMZ-50/30 | TMZ-50/30 |
| TMZ-17/10 | TMZ-17/10 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z33/18 | Z33/18 |
| Z-62/40 | Z-62/40 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-34/22 IC | Z-34/22 IC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-33 DC Power | Z-33 DC Power |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
| Z-45/25J IC | Z-45/25J IC |
| Z-34 IC | Z-34 IC |
| Z-30/20HD | Z-30/20HD |
| Z-30/20 | Z-30/20 |
| Z-45/22 MP | Z-45/22 MP |
| Z-45/22 | Z-45/22 |
| Z-25/8 | Z-25/8 |
| Z-20/8 | Z-20/8 |
| Z-20/8N | Z-20/8N |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
