The Genie 48911GT is a genuine OEM 90-Degree Elbow designed for a wide range of Genie telescopic boom lifts, articulating boom lifts, scissor lifts, telehandlers, and light towers. Sourced directly from the OEM supply chain, this fitting delivers the exact geometry and thread specification needed for a correct, leak-free connection. Cross-reference part number 48911GT against your machine's parts manual to confirm compatibility before ordering. This elbow fits an extensive lineup including Genie S and SX telescopic booms, Z and ZX articulating booms, GS scissor lifts, GTH telehandlers, TZ and TMZ trailer-mounted booms, and AL light towers.
Key Features
- OEM-Matched Fitting Angles and Thread Specs — Manufactured to the same 90-degree geometry and port dimensions as the original, ensuring a secure, leak-free hydraulic or pneumatic connection without rework.
- Direct-Replacement Hydraulic Fitting — Installs in the same port position as the factory elbow, with matching thread engagement that seats correctly on first installation.
- Broad Fleet Coverage — A single part that spans Genie S and SX telescopic booms, Z and ZX articulating booms, GS scissor lifts, GTH telehandlers, TZ and TMZ trailer-mounted booms, and AL light towers.
- Leak Prevention Where It Matters Most — A properly seated elbow maintains system pressure and flow direction; a cracked, stripped, or missing elbow can cause fluid loss, pressure drop, and loss of function in the circuit it serves.
- Operational Safety on Elevated Equipment — On aerial lifts, hydraulic integrity is directly tied to safe platform operation. Using a correct-specification OEM fitting supports the reliable function of the hydraulic circuits that control lift, boom, and drive movements.
A 90-degree elbow fitting redirects hydraulic or fluid lines at a right angle, allowing hoses and tubes to be routed cleanly around obstructions within the machine's frame and boom structure. This type of fitting maintains full-bore flow through the bend and is threaded at both ends to seal against the port and mating hose fitting. When an elbow fitting cracks, strips, or corrodes, the affected circuit can lose pressure or leak fluid — potentially affecting the operation of a lift, drive, or auxiliary function on the machine. Replacing a worn or damaged elbow promptly with a correct OEM-specification part restores circuit integrity and keeps the hydraulic system performing as designed.
Part Details
| Part Number | 48911GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | 90-Degree Elbow, 520220-4-6 |
Compatibility & Fitment
| Name | Model |
|---|---|
| AL5HT | AL5HT |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| SX-150 | SX-150 |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-2669DC | GS-2669DC |
| GS-3369DC | GS-3369DC |
| GS-4069DC | GS-4069DC |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-2668 RT | GS-2668 RT |
| GS-3268 RT | GS-3268 RT |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| TZ-34/20 | TZ-34/20 |
| TMZ-34/19 | TMZ-34/19 |
| TMZ-50/30 | TMZ-50/30 |
| TMZ-17/10 | TMZ-17/10 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-62/40 | Z-62/40 |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-34/22 IC | Z-34/22 IC |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/22 | Z-45/22 |
| Z-34 IC | Z-34 IC |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-25/8 | Z-25/8 |
| Z-20/8 | Z-20/8 |
| Z-20/8N | Z-20/8N |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
