The Wacker Neuson 5000165182 Carburetor Gasket is a genuine OEM component designed for the BS50-2, BS60-2, BS65-V, and BS70-2 series vibratory rammers, including two-cycle and oil-injected variants across standard and EU configurations. As a verified OEM part, the 5000165182 is manufactured to the exact material and dimensional specifications set by Wacker Neuson, ensuring a proper seal between the carburetor and the engine intake. This gasket fits a wide range of BS-series rammers across multiple shoe sizes and configurations, making it a go-to replacement for service technicians and equipment operators managing diverse rammer fleets. Confirm your machine's model number before ordering to ensure compatibility.
Key Features
- OEM-Grade Sealing Material — Manufactured to Wacker Neuson's exact material specification for compression resistance and fuel-vapor compatibility, so the gasket seals consistently under rammer operating conditions.
- Direct Carburetor Replacement — Seats directly between the carburetor body and the engine intake port, matching the original bolt pattern and gasket profile without modification.
- Broad BS-Series Fitment — Compatible with BS50-2, BS50-2i, BS60-2, BS60-2i, BS65-V, BS70-2, and BS70-2i vibratory rammers, covering standard, oil-injected, EU, and variable-speed configurations.
- Protects Fuel Delivery Accuracy — A failed or deteriorated carburetor gasket allows unmetered air into the fuel circuit, causing rough running, hard starting, or loss of power in the rammer's two-cycle engine.
- Fuel System Integrity — Maintaining a proper carburetor seal is essential to prevent fuel vapor leaks at the engine intake — a genuine OEM gasket ensures the seal performs to the original design intent.
The carburetor gasket forms an airtight seal between the carburetor and the engine's intake manifold or cylinder port. In a two-cycle rammer engine, this seal is critical because even a small air leak at this joint disrupts the carefully metered air-fuel mixture the carburetor delivers, leading to lean running conditions, erratic performance, or difficulty starting. Over time, heat cycling and fuel exposure cause the original gasket to harden, compress, or crack — replacing it with a correctly specified OEM part restores the sealed interface and brings fuel delivery back to the designed operating parameters.
Part Details
| Part Number | 5000165182 |
|---|---|
| Old Part Number | 0165182 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Carburetor Gasket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i | BS50-2i | 5000009383, 5000009338, 5000620026, 5000620611, 5000009473, 5000009332 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620733, 5000620610, 5000620609, 5000620048, 5000620025, 5000009382, 5000009380 |
| BS60-2i | BS60-2i | 5000009339, 5000009393, 5000620614, 5000620613 |
| 280mm/11in Shoe, Oil-injected Rammer | BS50-2i EU | 5000009416, 5000009414, 5000009412 |
| Vibratory Rammer with 250mm/10 in Shoe | BS50-2 EU | 5000009411, 5000009410, 5000009413 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Oil-injected Rammer with 280mm /11in | BS70-2i EU | 5000009428, 5000009426 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009421, 5000009417, 5000009418 |
| 280mm/11in Shoe, Two-cycle Vib ratory Rammer | BS60-2 | 5000620612, 5000009391, 5000009388 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009427, 5000009425, 5000009424 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| 330mm/13in Shoe, Vibratory Ram mer | BS70-2 | 5000009399, 5000009397 |
| 280mm/11in Shoe, Variable Spee d Rammer | BS65-V | 5000009396 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
