The Wacker Neuson Gasket Set is a genuine OEM component designed for a broad range of Wacker Neuson pumps and single-direction vibratory plate compactors, including the PT2 and PDT2/PDT3 diaphragm trash pump series, the PG2 dewatering pump, and VP/WP series vibratory plates such as the VP1340, VP1550, WP1540, WP1550, WP2050, and their wheel-kit and wet-surface variants. As a genuine OEM part, the is manufactured to the exact material grade and dimensional tolerances specified for these machines, ensuring correct sealing geometry across every mating surface it covers. This gasket set is the trusted solution for engine service, carburetor rebuilds, or any top-end work where maintaining a leak-free seal is critical to keeping these pumps and compactors running at full output.
Key Features
- OEM-Grade Sealing Materials — Each gasket in the set is produced to Wacker Neuson's specified material composition, delivering the compression resistance and chemical compatibility needed for fuel, oil, and air sealing surfaces on small-engine equipment.
- Complete Set for a Single Service Event — All required gaskets are included together, so engine and carburetor service can be completed in one pass without sourcing individual pieces separately.
- Broad Cross-Family Fitment — Confirmed fit across PT2 centrifugal trash pumps, PDT2 and PDT3 diaphragm pumps, PG2 dewatering pumps, and the full VP1340, VP1550, WP1540, WP1550, and WP2050 single-direction vibratory plate families, including water-cooled and wheel-kit configurations.
- Leak-Free Engine Performance — Properly seated gaskets maintain correct compression and prevent fuel or oil migration, which directly affects starting reliability and sustained output on both pumps and plate compactors.
- Fuel System Integrity — On pump and compactor engines, a failed carburetor or intake gasket can cause lean-running conditions, hard starting, or uncontrolled fuel leaks; replacing with a correct OEM set eliminates these risks at the source.
A gasket set provides the sealing elements needed at critical engine junctions — between the carburetor and intake, across the cylinder head, and at other mating faces where combustion gases, fuel, and oil must be contained. On small engines powering equipment like trash pumps and vibratory plate compactors, even minor gasket deterioration can result in compression loss, fuel leaks, or rough running that reduces compaction force or pump output. Replacing a worn or damaged gasket set restores the tight seals the engine depends on for consistent starting and full-rated performance.
Part Details
| Part Number | 5000156461 |
|---|---|
| Old Part Number | 0156461 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Gasket Set |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| Floor Saws | BFS 614B | 5000009526 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
