The Honda 130C1-896-004 is a genuine OEM Piston Ring Set (0.50) designed for a wide range of Honda equipment, including BF2 and BF20 portable outboard motors, EM650, EX650, and EX800 generators, the F200 tiller, and G100 horizontal shaft engines. As a Honda-sourced component, this ring set is manufactured to the same specifications as the part originally installed at the factory, ensuring a correct fit during engine overhaul or reconditioning. This is the 0.50 mm oversize variant — confirm your bore has been machined to the corresponding oversize before ordering.
Key Features
- Genuine Honda OEM — sourced directly from Honda, this ring set delivers the bore sealing and oil control characteristics the engine was originally engineered around, not an approximation of them.
- 0.50 Oversize Variant — sized for a cylinder that has been bored 0.50 mm over standard. Match this to your machined bore measurement before purchasing; fitting the wrong oversize will compromise ring-to-wall clearance.
- Broad Cross-Equipment Fitment — listed for BF2 and BF20 portable outboard motors, EM650, EX650, and EX800 generators, the F200 tiller, and G100 engines. Verify your model and serial number against the fitment table, as Honda supersedes parts at serial breaks.
- Compression and Oil Control — a correctly fitted ring set maintains cylinder compression for strong starting and full power output, and controls oil consumption by keeping combustion gases and lubricating oil on their respective sides of the piston.
Piston rings seal the gap between the piston and the cylinder wall, serving two critical jobs: holding compression pressure in the combustion chamber so the engine develops full power, and scraping excess oil back down the cylinder wall to prevent it from burning in the combustion chamber. When rings wear, become stuck in their grooves, or are fitted incorrectly, the engine loses compression, consumes oil, produces blue exhaust smoke, and struggles to start or run under load. Replacing the ring set with a correctly sized oversize set — matched to a freshly machined bore — restores the tight wall-to-ring contact the engine depends on for efficient, clean combustion.
Part Details
| Part Number | 130C1-896-004 |
|---|---|
| Brand | Honda |
| Part Type | Genuine OEM |
| Description | Piston Ring Set (0.50) |
Compatibility & Fitment
| Name | Models | Serial Range |
|---|---|---|
| Generator | EM650, EX650, EX800 | All |
| Horizontal Shaft Engine | G100 | All |
| Portable Outboard Motor | BF2, BF20 | All |
| Tiller | F200 | All |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
