The Honda 16100-730-045 Carburetor Assembly (BB25A B) is a genuine OEM Carburetor Assembly designed for the HS35 single-stage snow blower. As a factory-original component, this assembly matches the exact jetting, fuel metering, and idle circuit calibration Honda specifies for the HS35, ensuring the engine starts and runs as intended. Confirm your unit's serial number against the fitment table before ordering, as Honda supersedes carburetor assemblies at production breaks within the same model.
Key Features
- Correct Fuel Metering — genuine OEM jetting and emulsion tube calibration matched to the HS35's engine displacement and operating demands, so the snow blower pulls through heavy, wet snow without bogging or running lean
- Direct OEM Replacement — part number 16100-730-045 matches Honda's original specification, dropping into the existing airbox and fuel line fittings without reworking any mounting hardware
- Serial Number Matters — Honda issues carburetor supersessions at defined production points on the HS35; check your unit's serial number against the compatibility table to confirm this assembly is the right one for your machine
- Cold-Start Performance — a correctly functioning carburetor maintains the choke and fuel circuit response that reliable cold-weather starting depends on; a worn or gummed assembly causes hard starting, rough idling, and loss of full-throttle power exactly when you need the blower most
The carburetor is responsible for blending air and fuel in the precise ratio the engine needs at every throttle position — from the cold-start choke-rich mixture all the way through to full-load operation. On the HS35 single-stage snow blower, where the engine runs under sustained load in freezing temperatures, consistent fuel delivery is critical: a clean, correctly calibrated carburetor keeps the auger turning at rated speed even when clearing deep or packed snow. When a carburetor deteriorates — through varnish buildup, worn needle valves, or cracked diaphragm passages — the result is hard starting, surging, stalling under load, or an engine that simply will not run, leaving the machine unusable during exactly the conditions it is built for.
Part Details
| Part Number | 16100-730-045 |
|---|---|
| Brand | Honda |
| Part Type | Genuine OEM |
| Description | Carburetor Assembly (BB25A B) |
Compatibility & Fitment
| Name | Models | Serial Range |
|---|---|---|
| Single-Stage Snow Blower | HS35 | All |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
