The Honda 95701-08028-00 Flange Bolt (8x28) is a genuine OEM fastener used across an exceptionally wide range of Honda equipment, including GX360, GX440, GX610, and GX620 horizontal shaft engines, GD320 horizontal shaft diesel engines, E2500, E3500, E4500, EM5000, ES3500, and ES4500 generators, F500 tillers, G100 engines, H3011 riding mowers, H4013 lawn tractors, HP250 and HP400 power carriers, HS624, HS70, HS80, HS724, HS828, HS928, HS1132, HS1332, HS1336, HSM1336, HSS724, HSS928, and HSS1332 two-stage snow blowers, and WB20, WB30, WD20, WD30, WH15, WH20, and WX15 water pumps. As a genuine Honda OEM part, it meets the same standards as the original hardware installed at the factory. Because Honda supersedes fasteners at serial breaks, confirm your machine's serial number against the fitment table before ordering.
Key Features
- Genuine OEM Honda Hardware — sourced directly from Honda, this flange bolt carries the correct 8 mm diameter and 28 mm length to match the original specification for each application in the fitment list.
- Integrated Flange Design — the built-in flange distributes clamping load evenly without a separate washer, maintaining consistent holding force at the joint.
- Broad Cross-Equipment Compatibility — listed for Honda engines, generators, snow blowers, tillers, water pumps, riding mowers, lawn tractors, and power carriers; check your serial number against the fitment table to confirm the correct part for your unit.
- Exact-Count Replacement — ordering by part number 95701-08028-00 ensures you receive the correct bolt rather than a generic substitute that may differ in thread pitch, shank length, or flange diameter.
A flange bolt combines a standard hex bolt with a wide, integral flange beneath the head that acts like a built-in washer. This spreads the clamping load across a broader surface area, reducing the risk of the fastener working loose under vibration — a common condition in engines, pumps, and snow blowers during normal operation. When the correct flange bolt is in place, the joint is held at the right clamp load; when one is missing, stripped, or substituted with an incorrect size, the assembly can shift, leading to misalignment or component damage over time.
Part Details
| Part Number | 95701-08028-00 |
|---|---|
| Brand | Honda |
| Part Type | Genuine OEM |
| Description | Flange Bolt (8x28) |
Compatibility & Fitment
| Name | Models | Serial Range |
|---|---|---|
| Generator | E2500, E3500, E4500, EM5000, ES3500, ES4500 | All |
| Horizontal Shaft Diesel Engine | GD320 | All |
| Horizontal Shaft Engine | G100, GX360, GX440, GX610, GX620 | All |
| Lawn Tractor | H4013 | All |
| Power Carrier | HP250, HP400 | All |
| Riding Mower | H3011 | All |
| Tiller | F500 | 1001442-9999999 |
| Two-Stage Snow Blower | HS70, HS80 | 1015841-9999999 |
| Two-Stage Snow Blower | HS624, HS724, HS828, HS928, HS1132, HS1332, HS1336, HSM1336, HSS724, HSS928, HSS1332 | All |
| Water Pump | WB20, WB30, WD20, WD30, WH15, WH20, WX15 | All |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
