The Husqvarna 734117801 Washer is a genuine OEM component used across a wide range of Husqvarna Construction equipment, including FS series floor saws, PG and HTC series floor grinders, CT and CRT power trowels, DS series core drill stands, DC dust collectors, and MS and TS tile and masonry saws. As an authentic Husqvarna part, this washer is manufactured to the same specifications as the original, ensuring a correct fit in every application it supports. Cross-reference part number 734117801 against your machine's parts diagram to confirm the correct position before ordering. DHS Equipment supplies this part to help keep your equipment running across the full range of compatible Husqvarna Construction machines.
Key Features
- Genuine OEM Material Spec — manufactured to Husqvarna's original hardness and dimensional tolerances, ensuring consistent load distribution and clamping performance across all compatible assemblies.
- Broad Cross-Equipment Compatibility — a single part number covering FS floor saws, PG and HTC floor grinders, CT and CRT power trowels, DS drill stands, DC dust collectors, and MS and TS masonry saws.
- Direct Drop-In Replacement — matches the original fastener stack-up exactly, so this washer seats correctly without rework or shimming.
- Protects Mating Surfaces — distributes fastener load evenly to prevent pull-through, galling, and surface damage on the equipment's structural and assembly components.
- Verified Husqvarna Part Number — ordering by part number 734117801 eliminates the risk of installing an incorrectly sized washer that could compromise joint integrity or cause premature fastener loosening.
A washer works by distributing the clamping load of a bolt or nut across a wider surface area, reducing the risk of the fastener pulling through or damaging the material beneath it. In heavy-duty construction equipment like floor saws, grinders, and power trowels, fastener joints are subject to significant vibration and operational stress, making a correctly specified washer essential to maintaining secure assemblies over time. A missing, worn, or incorrectly sized washer can lead to fastener loosening, surface damage, and eventual joint failure — replacing it with the correct OEM part restores the integrity of the connection.
Part Details
| Part Number | 734117801 |
|---|---|
| Brand | Husqvarna |
| Part Type | Genuine OEM |
| Description | Washer |
Compatibility & Fitment
| Name | Model |
|---|---|
| Power Trowel | CRT48PS |
| Power Trowel | CRT36 |
| Power Trowel | CRT48 |
| Power Trowel | CT36 |
| Power Trowel | CT48 |
| Dust & Slurry Equipment | DC5500 |
| Dust & Slurry Equipment | T7500 |
| Dust & Slurry Equipment | DC6000I |
| Dust & Slurry Equipment | T8600 |
| Demolition Equipment | DCR100 |
| Concrete Core Drill | DS500EX |
| Concrete Core Drill | DS500 |
| Concrete Core Drill | DS900 |
| Floor Saw | FS3500G |
| Floor Saw | FS400LV |
| Floor Saw | FS413 |
| Floor Saw | FS4800D |
| Floor Saw | FS5000D |
| Floor Saw | FS513 |
| Floor Saw | FS520 |
| Floor Saw | FS6600D |
| Floor Saw | FS6800D |
| Floor Saw | FS7000D |
| Floor Saw | FS7000DL |
| Floor Saw | FS8400D |
| Floor Saw | FS7000DMT |
| Tile & Masonry Saw | MS360G |
| Tile & Masonry Saw | TS70 |
| Tile & Masonry Saw | MS360 |
| Floor Grinder | HTC510 |
| Floor Grinder | PG450 |
| Floor Grinder | PG680 |
| Floor Grinder | PG690RC |
| Floor Grinder | PG820 |
| Floor Grinder | PG820RC |
| Floor Grinder | PG830 |
| Floor Grinder | PG830RC |
| Floor Grinder | HTC450 |
| Floor Grinder | BG250 |
| Floor Grinder | BG250P |
| Floor Grinder | BMG780RC |
| Floor Grinder | BMG2200RC |
| Floor Grinder | HTC950RX |
| Floor Grinder | PG510I |
| Floor Grinder | PG510 |
| Floor Grinder | PG680RC |
| Floor Grinder | PG690P |
| Floor Scraper | BMS220P |
| Floor Scraper | BS110 |
| Floor Shaver | BMC335 |
| Shot Blaster | Blastrac1-10DPS75 |
| Shot Blaster | Blastrac1-10DS |
| Shot Blaster | Blastrac1-15DS |
| Shot Blaster | Blastrac2-20DT |
| Shot Blaster | Blastrac1-8DM |
| Floor Saw | FS5000 |
| Floor Saw | FS3500E |
| Tile & Masonry Saw | TS90 |
| Floor Saw | FS524 |
| Dust & Slurry Equipment | DC3300 |
| Dust & Slurry Equipment | DC6000 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
