The Multiquip 001221264 is a genuine OEM Bolt 12X120 T designed for MVH-series reversible plate compactors. As a factory-sourced fastener, it meets the exact dimensions and material specifications required to maintain the structural integrity of your compactor. This bolt is confirmed to fit the MVH-120GH, MVH120VGH, MVH-150D, MVH-150D2, MVH-150GH, MVH150VD2, MVH150VGH, MVH206D, and MVH-206GH. DHS Equipment supplies this part direct so you can get your machine back to work without second-guessing fitment.
Key Features
- OEM-Grade Fastener Integrity — Manufactured to the same thread pitch, shank diameter, and tensile strength as the original bolt, ensuring the joint holds under the continuous vibration loads that reversible plate compactors generate.
- Drop-In Replacement — Matches the M12 x 120 mm specification of the original, seating directly into existing threaded bores without any rework or additional hardware.
- Broad MVH-Series Coverage — A single part number covers MVH-120GH, MVH120VGH, MVH-150D, MVH-150D2, MVH-150GH, MVH150VD2, MVH150VGH, MVH206D, and MVH-206GH compactors.
- Vibration-Resistant Retention — Purpose-spec'd for high-cycle compaction equipment where undertorqued or incorrect-length fasteners can work loose, leading to component misalignment or structural damage.
- Structural Safety Assurance — Using the correct OEM fastener in load-bearing or exciter-adjacent positions is critical; an incorrect bolt length or grade can compromise compactor frame and exciter housing integrity during operation.
A bolt of this specification serves as a primary structural fastener on MVH-series reversible plate compactors, securing major assemblies — such as the exciter housing, frame brackets, or handle mounts — that must remain rigid under sustained vibratory forces. Because reversible plate compactors generate high-frequency oscillation throughout every working cycle, fasteners in these positions are subject to constant dynamic stress. A worn, stretched, or incorrect-length bolt in any of these locations can allow components to shift, accelerate wear on surrounding parts, and ultimately create unsafe operating conditions.
For questions about fitment or to confirm this is the correct bolt for your machine, contact the DHS Equipment parts team for assistance.
Part Details
| Part Number | 001221264 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Bolt 12X120 T |
Compatibility & Fitment
| Name | Model |
|---|---|
| Plate Compactors | MVH-120GH |
| Plate Compactors | MVH120VGH |
| Plate Compactors | MVH-150D |
| Plate Compactors | MVH-150D2 |
| Plate Compactors | MVH-150GH |
| Plate Compactors | MVH150VD2 |
| Plate Compactors | MVH150VGH |
| Plate Compactors | MVH206D |
| Plate Compactors | MVH-206GH |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
