The Multiquip 12081 Hose Assembly 1ID 25LN 100R1 90 End is a genuine OEM hydraulic hose assembly designed for STH series hydrostatic ride-on trowels. As a direct Multiquip OEM component, 12081 is manufactured to the same specifications as the original, ensuring a correct, drop-in installation with no guesswork on fitment. This assembly features a 1-inch inner diameter, 25-inch length, 100R1 construction rating, and a 90-degree end configuration — all critical details for proper routing and connection within the machine's hydraulic circuit. If you are servicing or restoring hydraulic function on an STH hydrostatic ride-on trowel, this is the correct replacement hose assembly to use.
Key Features
- Genuine OEM Hydraulic Construction — Built to the same pressure rating and hose material grade as the original, ensuring the 100R1 specification is maintained for safe hydraulic fluid transfer under operating load.
- 90-Degree End Configuration — The pre-formed 90-degree fitting end allows the hose to route cleanly into tight or angled port connections on the hydraulic system without requiring field bends or adapters.
- Correct 1-Inch ID and 25-Inch Length — Dimensioned to match the original routing path on STH series machines, eliminating the need to measure or source custom hose lengths at a hydraulic shop.
- STH Series Fitment — Confirmed for STH hydrostatic ride-on trowels, making it straightforward to verify compatibility before ordering.
- Hydraulic Integrity Under Pressure — A compromised or failing hydraulic hose can cause fluid loss, loss of blade pitch control, and drive failure on a hydrostatic trowel; replacing it with a correctly rated OEM assembly restores full hydraulic system integrity.
A hydraulic hose assembly carries pressurized fluid between components in the trowel's hydrostatic drive and blade-pitch control systems. On a hydrostatic ride-on trowel like the STH series, the hydraulic circuit is responsible for both propelling the machine and adjusting blade angle — so a leaking or burst hose can bring work to an immediate halt and create a slip hazard on the deck. The 100R1 construction rating refers to the hose's single-wire braid reinforcement layer, which is matched to the pressure demands of the circuit it serves. Replacing a worn or damaged hose with the correct OEM assembly, Multiquip 12081, restores the circuit to its original pressure capacity and routing geometry.
For questions about fitment or to confirm this is the right part for your machine, contact the DHS Equipment team directly.
Part Details
| Part Number | 12081 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Hose Assembly 1ID 25LN 100R1 90 End |
Compatibility & Fitment
| Name | Model |
|---|---|
| Hydrostatic Ride-On Trowels | STH |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
