The Multiquip 13013ZE2013 is a genuine OEM Piston Ring Set 0.75 Optional designed for a wide range of Multiquip and Whiteman equipment including MC94P/S, MC94SK, MC94PK, MC64P/S, WM70S/P, R2000H, QP3TH, GA3.6HA, and GA3.6HZ models. As a direct OEM part, 13013ZE2013 is manufactured to the same specification as the original component, ensuring a correct fit and consistent engine performance across all compatible units. This optional 0.75mm oversize ring set is intended for engines that have been bored to accommodate worn cylinder walls, making it an essential service part during engine rebuilds. DHS Equipment stocks this genuine Multiquip part to keep your equipment running at full operating capacity.
Key Features
- Genuine OEM Compression Integrity — Manufactured to original Honda engine tolerances, this ring set maintains correct compression and oil control in the cylinder bore for consistent power output.
- 0.75mm Oversize Specification — Sized for cylinders that have been bored 0.75mm over standard, this set installs directly into a properly prepared bore without further modification to the rings themselves.
- Broad Equipment Compatibility — Fits MC94P/S, MC94SK, MC94PK, MC64P/S, WM70S/P, R2000H, QP3TH, GA3.6HA, and GA3.6HZ, covering mixers, rollers, pumps, and generators in the Multiquip lineup.
- Rebuild-Ready Service Part — Engineered for engine overhaul applications where standard-size rings are no longer appropriate due to cylinder wear, restoring proper sealing after a bore job.
- Fuel and Oil Efficiency Restored — Worn or broken piston rings allow combustion gases to blow past the piston and oil to enter the combustion chamber; correctly fitted rings eliminate both issues and restore fuel efficiency.
Piston rings seal the gap between the piston and the cylinder wall, performing three critical jobs: containing combustion pressure to drive the piston, controlling the thin film of oil on the cylinder wall, and transferring heat away from the piston into the cylinder. When rings wear or break, compression drops, oil consumption rises, and the engine loses power and runs roughly. An oversize ring set like the 13013ZE2013 is used specifically after cylinder boring — a machining process that removes worn or scored material from the cylinder wall — restoring the tight seal that a fresh engine requires. Using the correct oversize specification is essential; rings that are even slightly undersized will not seal properly, while oversized rings will not fit the bore at all.
Part Details
| Part Number | 13013ZE2013 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Piston Ring Set 0.75 Optional |
Compatibility & Fitment
| Name | Model |
|---|---|
| MQ Mixers | MC94P/S |
| MQ Mixers | MC94SK/MC94PK |
| MQ Mixers | MC64P/S |
| Whiteman Mixers | WM70S/P |
| Rollers | R2000H |
| Trash Pumps | QP3TH |
| Gasoline Powered Generators | GA3.6HA |
| Gasoline Powered Generators | GA3.6HZ |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
