The Multiquip 13101 is a genuine OEM Piston Standard designed for an exceptionally wide range of Multiquip, Whiteman, and Essick equipment, including rammers such as the MTX50HD, MTX70HD, and MTX80HDR, plate compactors including the MVC82VHW, MVC88VTHW, MVH208GH, and MVH408GH, centrifugal pumps like the QP205SH and QP402H, and mixers across the MC and WM series. As a genuine OEM component sourced directly from Multiquip, the 13101 is manufactured to the exact specification of the original part, ensuring a direct, drop-in replacement with no guesswork. This piston is compatible across an extensive cross-section of Honda GX-powered Multiquip equipment, making it a high-value stocking part for dealers, rental fleets, and service shops. Verify your model code against the fitment list to confirm compatibility before ordering.
Key Features
- Genuine OEM Dimensional Accuracy — Manufactured to the original bore diameter and compression height tolerances, ensuring correct ring seal and combustion chamber clearance across all compatible engines.
- Cross-Platform Compatibility — A single piston part number covering rammers (MTX50HD through MTX80HDR), plate compactors (MVC and MVH series), centrifugal pumps (QP205SH, QP402H), concrete and mortar mixers (MC and WM series), masonry saws (MP and SP series), rollers, screeds, vibrators, and generators.
- Standard Bore Specification — Sized for standard (STD) bore engines; intended for use in engines with unworn or freshly honed cylinders at the original factory bore diameter — no overbore or sleeve replacement required.
- Direct Drop-In Replacement — Designed to install using the same hardware, pin, and ring set as the original, keeping engine rebuild time to a minimum during scheduled maintenance or failure repair.
- Sustained Power Output — A correctly seated piston restores compression to specification, which directly affects starting reliability, fuel efficiency, and full-load performance on Honda GX-powered Multiquip machines.
The piston is the reciprocating component inside the engine cylinder that transfers combustion force to the crankshaft via the connecting rod. It must maintain a precise fit within the cylinder bore to seal combustion gases above it while allowing oil to lubricate the cylinder wall below. Over time, piston rings wear, the piston skirt can score, and clearances open up — leading to lost compression, hard starting, excessive oil consumption, and reduced power output. Replacing a worn piston with a genuine OEM standard-bore unit like the Multiquip 13101 restores the engine to its original compression ratio and power characteristics, extending the service life of the machine without the cost of a short block replacement.
Part Details
| Part Number | 13101 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Piston Standard |
Compatibility & Fitment
| Name | Model |
|---|---|
| Centrifugal Pumps | QP205SH |
| Centrifugal Pumps | QP402H |
| Duo Screeds | DSGPULW |
| Essick Mixers | EM120P Series |
| Essick Mixers | EM120S Series |
| Gasoline Powered Generators | GA2.5HR |
| Gasoline Powered Generators | GA3.6HA |
| Gasoline Powered Generators | GA3.6HR |
| Gasoline Powered Generators | GA3.6HZ |
| Gasoline Powered Generators | GA6HB |
| Gasoline Powered Generators | GA6HEB |
| Gasoline Powered Generators | GA6HZ |
| Gasoline Powered Generators | GA9.7HE |
| Gasoline Powered Generators | GAC2.2HZ |
| Gasoline Powered Generators | GAC2.5HR |
| International Walk-Behind Power Trowels | CA-4-4H |
| MQ Mixers | MC12PH |
| MQ Mixers | MC44S |
| MQ Mixers | MC64P/S |
| MQ Mixers | MC94P/S |
| MQ Mixers | MC94SK/MC94PK |
| Plate Compactors | MVB85H |
| Plate Compactors | MVC40H |
| Plate Compactors | MVC64VH |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC82VH |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC88VTH |
| Plate Compactors | MVC88VTHW |
| Plate Compactors | MVC90H |
| Plate Compactors | MVH128GH |
| Plate Compactors | MVH158GH |
| Plate Compactors | MVH208GH |
| Plate Compactors | MVH304GSB |
| Plate Compactors | MVH308GH |
| Plate Compactors | MVH408GH |
| Rammers | MTR40HF |
| Rammers | MTX50HD |
| Rammers | MTX60HD |
| Rammers | MTX60HF |
| Rammers | MTX70HD |
| Rammers | MTX70HDR |
| Rammers | MTX70HF |
| Rammers | MTX80HDR |
| Rollers | AR13H |
| Rollers | AR13HA/HAR |
| Rollers | AR13HC |
| Rollers | AR14H |
| Rollers | MRH800GS |
| Rollers | R2000H |
| Rollers | V305EH |
| Saws | MP115E |
| Saws | MP120E |
| Saws | MP1455HP |
| Saws | MP1H |
| Saws | MP2050E1 |
| Saws | MP2050E3 |
| Saws | MP2090HP |
| Saws | MP25E1 |
| Saws | MP25E3 |
| Saws | MP275E3 |
| Saws | MP2H |
| Saws | SP118 |
| Saws | SP1CE13H18 |
| Saws | SP1G |
| Centrifugal Pumps | QP3TH |
| Vibrators | G55H |
| Welders | GAW180HE |
| Welders | GAW180HE1 |
| Welders | GAW180HEA |
| Whiteman Mixers | WM120PH |
| Whiteman Mixers | WM120SH |
| Whiteman Mixers | WM70S/P |
| Whiteman Ride-On Power Trowels | JWN24HTCSL/HSCSL |
| Whiteman Walk-Behind Power Trowels | CA4HM |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
