The Multiquip 16015ZE0831 Float Chamber Set is a genuine OEM carburetor component designed for a broad range of Multiquip and Whiteman equipment, including CA4HM walk-behind power trowels, MVC82VHW, MVC82VH, MVC64VHW, MVC64VH, and MVC90H plate compactors, WM70S/P mortar mixers, G55H vibrators, QP205SH centrifugal pumps, MP1455HP, MP120E, MP115E, and MP1H masonry saws, GAC2.2HZ gasoline-powered generators, and MC64P/S concrete mixers. As a direct Multiquip OEM part, the 16015ZE0831 is manufactured to the same specification as the original component your equipment shipped with, ensuring a precise drop-in installation with no guesswork. Sourcing the correct float chamber set matters — an ill-fitting or worn chamber causes fuel metering problems that lead to rough running, hard starts, and engine flooding across all of these machine families.
Key Features
- Genuine OEM Fuel Metering Integrity — Manufactured to original Multiquip specification, ensuring the float chamber seats correctly and maintains consistent fuel delivery to the carburetor.
- Direct Drop-In Installation — Engineered to match the original mounting pattern and sealing surfaces, so the chamber installs cleanly against the carburetor body without rework or adapters.
- Broad Equipment Compatibility — A single OEM part number covering CA4HM trowels, MVC-series plate compactors, WM70S/P mixers, QP205SH pumps, MP-series masonry saws, GAC2.2HZ generators, and MC64P/S mixers.
- Restored Throttle Response and Idle Stability — A correctly sealed float chamber holds the right fuel level inside the carburetor, eliminating the lean surging or rich flooding that a cracked or degraded chamber causes.
- Fuel System Safety — A damaged or improperly sealed float chamber can allow fuel to escape at the carburetor base; replacing it with the correct OEM set restores a properly sealed fuel circuit and reduces leak risk.
The float chamber is the lower section of a carburetor that holds a small, controlled reservoir of fuel for the engine to draw from. A float mechanism inside the chamber rises and falls with the fuel level, opening and closing a needle valve to keep the reservoir at the correct depth. When the chamber cracks, warps, or its sealing gasket fails, fuel level becomes unstable — causing the engine to run lean and surge at speed, run rich and flood at idle, or leak raw fuel at the base of the carburetor. Replacing the float chamber set restores proper fuel containment and consistent fuel level control, which is the foundation of steady engine performance across all operating conditions.
Part Details
| Part Number | 16015ZE0831 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Float Chamber Set |
Compatibility & Fitment
| Name | Model |
|---|---|
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC82VH |
| Whiteman Mixers | WM70S/P |
| Vibrators | G55H |
| Centrifugal Pumps | QP205SH |
| Saws | MP1455HP |
| Saws | MP120E |
| Saws | MP115E |
| Saws | MP1H |
| Gasoline Powered Generators | GAC2.2HZ |
| Plate Compactors | MVC90H |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC64VH |
| MQ Mixers | MC64P/S |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
