The Multiquip 1604 Choke Set is a genuine OEM replacement designed for a wide range of Multiquip, Whiteman, and Essick equipment including MTX70HD, MTX60HD, MTX50HD, MTX80HDR, MTX70HDR rammers, MVC and MVH series plate compactors, WM and EM series mortar and concrete mixers, SP and MP series flat and masonry saws, QP series pumps, walk-behind and ride-on power trowels, and select generators and rollers. As a factory-authorized OEM component, the 1604 Choke Set meets the original design specifications used in production, ensuring the part integrates correctly with the carburetor assembly it was built to serve. DHS Equipment stocks this part to help operators across trades keep their Honda-powered equipment running without guesswork on compatibility.
Key Features
- Genuine OEM Carburetor Choke Integrity — Built to the original design spec, ensuring the choke plate, shaft, and linkage align correctly within the carburetor bore for consistent air-fuel ratio control at cold start.
- Direct Carburetor Replacement — Installs into the OEM carburetor position without modification, using the same mounting points and linkage geometry as the original choke assembly.
- Broad Cross-Equipment Compatibility — Fits MTX rammers, MVC and MVH plate compactors, WM and EM mixers, SP and MP saws, QP pumps, V and MRH rollers, and select trowel and generator models across the Multiquip portfolio.
- Cold-Start Performance — A properly functioning choke set enriches the fuel mixture during cold starts, allowing Honda-powered engines to fire quickly and reach operating temperature without flooding or excessive cranking.
- Prevents Rough Running and Hard Starting — A worn or damaged choke set causes erratic idle, failed cold starts, and excessive fuel consumption; replacing it restores normal engine response immediately.
The choke set controls the amount of air entering the carburetor during engine startup. When the choke is closed, it restricts airflow and creates a richer fuel mixture that allows a cold engine to ignite reliably. Once the engine warms up, the choke opens to restore the correct air-to-fuel balance for normal operation. A damaged or stuck choke set disrupts this process, leading to hard starting, rough idling, excessive fuel use, or an engine that stalls before reaching operating temperature.
Part Details
| Part Number | 1604 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Choke Set |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rammers | MTX70HD |
| Rammers | MTX60HD |
| Rammers | MTX50HD |
| Rammers | MTX80HDR |
| Rammers | MTX70HDR |
| Rollers | RW3010 |
| Rollers | MRH800GS |
| Whiteman Mixers | WM120SH |
| Whiteman Mixers | WM120PH |
| Essick Mixers | EM120S Series |
| Essick Mixers | EM120P Series |
| Saws | SP118 |
| Saws | SP1CE13H18 |
| Rollers | V305EH |
| MQ Mixers | MC12PH |
| Plate Compactors | MVH304GSB |
| Plate Compactors | MVH208GH |
| Plate Compactors | MVH308GH |
| Saws | MP2090HP |
| Saws | MP2050E3 |
| Saws | MP2050E1 |
| Saws | MP2H |
| Saws | MP275E3 |
| Saws | MP25E3 |
| Saws | MP25E1 |
| Centrifugal Pumps | QP402H |
| Centrifugal Pumps | QP3TH |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Saws | SP1G |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC82VH |
| Plate Compactors | MVB85H |
| Gasoline Powered Generators | GAC2.5HR |
| Gasoline Powered Generators | GA2.5HR |
| MQ Mixers | MC64P/S |
| Whiteman Mixers | WM70S/P |
| MQ Mixers | MC44S |
| Centrifugal Pumps | QP205SH |
| Saws | MP1455HP |
| Saws | MP120E |
| Saws | MP115E |
| Saws | MP1H |
| Gasoline Powered Generators | GAC2.2HZ |
| Plate Compactors | MVC90H |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC64VH |
| International Walk-Behind Power Trowels | CA-4-4H |
| Vibrators | G55H |
| Plate Compactors | MVH408GH |
| Plate Compactors | MVH128GH |
| Plate Compactors | MVH158GH |
| Plate Compactors | MVC88VTHW |
| Plate Compactors | MVC88VTH |
| Plate Compactors | MVC40H |
| Rammers | MTR40HF |
| Rammers | MTX60HF |
| Rammers | MTX70HF |
| Welders | DLW400ES |
| Welders | DLW400ESA |
| Welders | DLW400ESA1 |
| Whiteman Ride-On Power Trowels | JWN24HTCSL/HSCSL |
| International Ride-On Power Trowels | EHHNK5 |
| Whiteman Ride-On Power Trowels | HHNG5 |
| Whiteman Ride-On Power Trowels | HHXDF4-DF5 |
| Whiteman Ride-On Power Trowels | HHXD5-ES |
| Whiteman Ride-On Power Trowels | HHXG5 |
| Whiteman Ride-On Power Trowels | HHXD5 |
| Whiteman Ride-On Power Trowels | HHN34TVD |
| Whiteman Ride-On Power Trowels | HTN28K |
| Whiteman Ride-On Power Trowels | HTN27K |
| Whiteman Ride-On Power Trowels | HHN31V |
| Whiteman Ride-On Power Trowels | HTN-KHOLER/ONAN/HONDA |
| Whiteman Ride-On Power Trowels | JTO-SERIES |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
