The Multiquip 16574ZE1000 Lever Spring is a genuine OEM component designed for a wide range of Multiquip equipment, including plate compactors, concrete mixers, rollers, walk-behind trowels, pumps, and masonry saws. This is a direct OEM replacement sourced through Multiquip's authorized parts program, ensuring the part meets the original design specification for every machine it serves. Confirmed fitment includes MVC and MVH series plate compactors, MC and WM series mixers, MRH and V305EH rollers, CA4HM walk-behind trowels, QP centrifugal and trash pumps, MP masonry saws, and additional equipment families across the Multiquip portfolio. If you're servicing a machine in any of these families, part number 16574ZE1000 is the correct OEM lever spring to specify.
Key Features
- Genuine OEM Spring Rate: — Manufactured to the original tension specification, so lever engagement and return behavior perform exactly as the machine was engineered to operate.
- Direct Drop-In Replacement: — Matches the original mounting points and dimensions, allowing straightforward installation without reworking the lever linkage or surrounding hardware.
- Broad Multiquip Fitment: — Covers MVC64, MVC82, MVC88, MVC90, MVB85, MVH128, MVH158, MVH208, MVH304, MVH308, MVH408, MC44, MC64, MC94, MC12, WM70, WM120, EM120, MRH800, V305EH, CA4HM, QP205SH, QP402H, QP3TH, MP series masonry saws, SP series flat saws, R2000H roller, and G55H vibrator models.
- Consistent Lever Return Force: — A properly tensioned lever spring keeps control linkages snapping back to the neutral or disengaged position, preventing sluggish or incomplete lever return that can affect operator control.
- Authorized Parts Source: — Sold by DHS Equipment as an authorized Multiquip parts distributor, so you receive a verified OEM part with full traceability back to the original manufacturer.
A lever spring provides the return tension in a control linkage, pulling or pushing a lever back to its resting position after the operator releases it. In compaction, mixing, pumping, and cutting equipment, this spring ensures that throttle levers, clutch controls, or engagement linkages disengage cleanly and completely when released. When a lever spring weakens, stretches, or breaks, the lever may stick in the engaged position, fail to return fully, or lose consistent feel — creating both control issues and potential safety concerns during operation.
Part Details
| Part Number | 16574ZE1000 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Lever Spring |
Compatibility & Fitment
| Name | Model |
|---|---|
| MQ Mixers | MC94P/S |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC82VH |
| Plate Compactors | MVH128GH |
| Plate Compactors | MVC88VTHW |
| Plate Compactors | MVC88VTH |
| Rollers | MRH800GS |
| MQ Mixers | MC94SK/MC94PK |
| Plate Compactors | MVB85H |
| Rollers | V305EH |
| Saws | SP1G |
| MQ Mixers | MC12PH |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Plate Compactors | MVH208GH |
| Plate Compactors | MVH158GH |
| Plate Compactors | MVH408GH |
| Plate Compactors | MVH308GH |
| MQ Mixers | MC64P/S |
| Whiteman Mixers | WM70S/P |
| MQ Mixers | MC44S |
| Whiteman Mixers | WM120SH |
| Whiteman Mixers | WM120PH |
| Essick Mixers | EM120S Series |
| Essick Mixers | EM120P Series |
| Centrifugal Pumps | QP205SH |
| Saws | SP118 |
| Saws | MP2090HP |
| Saws | MP2050E3 |
| Saws | MP2050E1 |
| Saws | MP2H |
| Saws | MP275E3 |
| Saws | MP25E3 |
| Saws | MP25E1 |
| Saws | MP1455HP |
| Saws | MP120E |
| Saws | MP115E |
| Saws | MP1H |
| Rollers | R2000H |
| Saws | SP1CE13H18 |
| Centrifugal Pumps | QP402H |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC64VH |
| International Walk-Behind Power Trowels | CA-4-4H |
| Plate Compactors | MVH304GSB |
| Vibrators | G55H |
| Centrifugal Pumps | QP3TH |
| Plate Compactors | MVC90H |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
