The Multiquip 16575 Control Lever Washer is a genuine OEM component designed for a wide range of Multiquip equipment including MVC and MVH plate compactors, AR series rollers, WM70 mortar mixers, walk-behind trowels, masonry saws, centrifugal and trash pumps, concrete mixers, and roller screeds. As a factory-sourced part, the 16575 matches the original specification exactly, making it a straightforward swap during scheduled maintenance or repair. Cross-family fitment is extensive — from MVC82VHW and MVH408GH compactors to AR13H rollers, CA4HM trowels, WM70S/P mixers, and WRS5200 roller screeds — so confirm your model code before ordering.
Key Features
- Genuine OEM Sourcing — Manufactured to Multiquip's original material and dimensional specification, ensuring the washer seats and functions exactly as it did from the factory.
- Direct Drop-In Replacement — The 16575 installs in the control lever assembly without modification, restoring proper lever movement and feel immediately.
- Broad Cross-Family Compatibility — A single part number covers plate compactors (MVC64VH, MVC82VHW, MVC88VTHW, MVC90H, MVH128GH, MVH158GH, MVH208GH, MVH304GSB, MVH308GH, MVH408GH, MVB85H), rollers (AR13H, AR13HA/HAR, AR13HC, MRH800GS, R2000H, V305EH), trowels (CA4HM, CA-4-4H), mixers (MC44S, MC64P/S, MC94P/S, MC94SK/MC94PK, MC12PH, WM70S/P), pumps (QP205SH, QP402H, QP3TH), saws (SP1G, SP118, SP1CE13H18, MP1H, MP2H, MP1455HP, MP120E, MP115E, MP2090HP, MP2050E3, MP2050E1, MP275E3, MP25E3, MP25E1), vibrators (G55H), and roller screeds (WRS5200, WRS5200DFPU, WRSPUDF).
- Control Precision Restored — A worn or missing control lever washer introduces slack and misalignment in the lever linkage, causing imprecise operator control. Replacing it with part 16575 restores crisp, consistent lever response.
- Low-Cost Maintenance Item — Washers at pivot and lever points are frequently overlooked during service intervals; replacing this part proactively avoids accelerated wear on surrounding linkage components.
A control lever washer acts as a bearing surface and spacer within the lever pivot assembly, allowing the control lever to move freely while maintaining correct alignment and limiting metal-to-metal contact between moving components. Without it, the lever pivot wears prematurely, introducing play and reducing the operator's ability to make accurate, repeatable adjustments. On compactors, rollers, trowels, and screeds alike, precise control input directly affects compaction consistency and finish quality, making this small part a critical element of overall machine performance.
Part Details
| Part Number | 16575 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Control Lever Washer |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rollers | AR13HA/HAR |
| Rollers | AR13HC |
| Rollers | AR13H |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC82VH |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Plate Compactors | MVB85H |
| Plate Compactors | MVH128GH |
| Plate Compactors | MVH158GH |
| Plate Compactors | MVC88VTHW |
| Plate Compactors | MVC88VTH |
| Saws | SP1G |
| MQ Mixers | MC64P/S |
| Whiteman Mixers | WM70S/P |
| MQ Mixers | MC44S |
| Centrifugal Pumps | QP205SH |
| Saws | MP1455HP |
| Saws | MP120E |
| Saws | MP115E |
| Saws | MP1H |
| Plate Compactors | MVC90H |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC64VH |
| International Walk-Behind Power Trowels | CA-4-4H |
| Vibrators | G55H |
| MQ Mixers | MC94P/S |
| Rollers | MRH800GS |
| MQ Mixers | MC94SK/MC94PK |
| Plate Compactors | MVH208GH |
| Plate Compactors | MVH408GH |
| Plate Compactors | MVH308GH |
| Rollers | V305EH |
| MQ Mixers | MC12PH |
| Saws | SP118 |
| Saws | MP2090HP |
| Saws | MP2050E3 |
| Saws | MP2050E1 |
| Saws | MP2H |
| Saws | MP275E3 |
| Saws | MP25E3 |
| Saws | MP25E1 |
| Rollers | R2000H |
| Saws | SP1CE13H18 |
| Centrifugal Pumps | QP402H |
| Plate Compactors | MVH304GSB |
| Centrifugal Pumps | QP3TH |
| Ride-On Roller Screeds | WRSPUDF |
| Ride-On Roller Screeds | WRS5200 |
| Ride-On Roller Screeds | WRS5200DFPU |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Honda