The Multiquip 16610ZE1000 is a genuine OEM Choke Lever Standard designed for a wide range of Multiquip, Whiteman, and Essick equipment powered by Honda engines. This is a direct OEM replacement sourced from Multiquip, ensuring the part meets the original design specifications for your machine. Compatible models span plate compactors including MVC64VH, MVC82VH, MVC88VTH, MVH128GH, MVH208GH, and MVH408GH, as well as centrifugal pumps QP205SH and QP402H, concrete mixers MC12PH, MC44S, MC64P/S, MC94P/S, and Whiteman mixers WM70S/P, WM120PH, and WM120SH, among others. With broad cross-model fitment, the 16610ZE1000 is a practical stock item for fleets running multiple Multiquip machine types.
Key Features
- Genuine OEM Construction — Manufactured to the original Honda engine choke lever specification, ensuring correct engagement travel and detent feel on every compatible machine.
- Drop-In Lever Replacement — Matches the original mounting point and cable attachment geometry, allowing straightforward installation without modification to the choke linkage or cable.
- Broad Multiquip Fleet Compatibility — Confirmed fitment across plate compactors (MVC, MVH, MVB series), centrifugal and trash pumps (QP series), concrete and mortar mixers (MC, WM, EM series), masonry saws (MP, SP series), rollers, trowels, and vibrators.
- Correct Cold-Start Performance — A properly functioning choke lever delivers the right fuel-to-air ratio during startup, preventing hard starting, rough idle, and excessive fuel consumption caused by a worn or broken lever.
- Exact Part Number Match — Ordering by OEM part number 16610ZE1000 eliminates guesswork and confirms you receive the correct lever for your specific Honda-powered Multiquip equipment.
The choke lever controls the choke plate inside the carburetor, restricting airflow to enrich the fuel mixture when starting a cold engine. Without a correctly functioning choke lever, the engine may be difficult or impossible to start in cold conditions, and an improperly seated lever can cause the choke to remain partially closed during operation, leading to rough running and fuel waste. Replacing a worn, cracked, or broken choke lever with the correct OEM part restores reliable cold-start behavior and smooth throttle response once the engine reaches operating temperature.
Part Details
| Part Number | 16610ZE1000 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Choke Lever Standard |
Compatibility & Fitment
| Name | Model |
|---|---|
| Centrifugal Pumps | QP205SH |
| Centrifugal Pumps | QP402H |
| Essick Mixers | EM120P Series |
| Essick Mixers | EM120S Series |
| International Walk-Behind Power Trowels | CA-4-4H |
| MQ Mixers | MC12PH |
| MQ Mixers | MC44S |
| MQ Mixers | MC64P/S |
| MQ Mixers | MC94P/S |
| MQ Mixers | MC94SK/MC94PK |
| Plate Compactors | MVB85H |
| Plate Compactors | MVC64VH |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC82VH |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC88VTH |
| Plate Compactors | MVC88VTHW |
| Plate Compactors | MVC90H |
| Plate Compactors | MVH128GH |
| Plate Compactors | MVH158GH |
| Plate Compactors | MVH208GH |
| Plate Compactors | MVH304GSB |
| Plate Compactors | MVH308GH |
| Plate Compactors | MVH408GH |
| Rollers | MRH800GS |
| Rollers | R2000H |
| Rollers | V305EH |
| Saws | MP115E |
| Saws | MP120E |
| Saws | MP1455HP |
| Saws | MP1H |
| Saws | MP2050E1 |
| Saws | MP2050E3 |
| Saws | MP2090HP |
| Saws | MP25E1 |
| Saws | MP25E3 |
| Saws | MP275E3 |
| Saws | MP2H |
| Saws | SP118 |
| Saws | SP1CE13H18 |
| Saws | SP1G |
| Centrifugal Pumps | QP3TH |
| Vibrators | G55H |
| Whiteman Mixers | WM120PH |
| Whiteman Mixers | WM120SH |
| Whiteman Mixers | WM70S/P |
| Whiteman Walk-Behind Power Trowels | CA4HM |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
