The Multiquip 17031 O-Ring Size 2-237 Viton is a genuine OEM seal designed for MP200-Series masonry saws. This is the factory-specified Viton compound ring in the exact 2-237 size, ensuring a proper fit in the sealing location it was engineered for. Sourced directly from Multiquip, part 17031 is the correct choice when you need to restore a leak-free seal on your MP200-Series saw. Keep a spare on hand — O-rings are a common service item during routine maintenance and pump or water system rebuilds.
Key Features
- Viton Compound Seal — Viton elastomer resists heat, water, and the mild chemical exposure common in masonry saw water feed systems, holding its sealing properties longer than standard rubber.
- Exact 2-237 Sizing — Dimensioned to the industry-standard 2-237 cross-section and inner diameter, so it seats correctly in the designed groove without over-compression or gapping.
- Genuine OEM Component — Manufactured to Multiquip's original specification, ensuring the material grade and durometer match what the machine was built with.
- Compatible with MP200-Series Masonry Saws — Confirmed fitment for Multiquip MP200-Series equipment; verify your model and location in the parts diagram before ordering.
- Stops Water and Fluid Leaks — A worn or flattened O-ring allows water or fluid to bypass the seal, leading to wet work areas, water starvation at the blade, and potential damage to adjacent components.
An O-ring is a circular elastomeric seal that sits in a machined groove between two mating surfaces or around a shaft and port, creating a pressure-tight barrier that prevents fluid or water from leaking past the joint. On a masonry saw like the MP200-Series, O-rings are used throughout the water delivery and pump circuit to keep cooling water directed to the blade and out of areas where it can cause damage. When an O-ring ages, flattens, or chemically degrades, it loses its ability to conform to the mating surfaces, and leakage follows — often showing up as pooling water under the saw, reduced water flow to the blade, or visible weeping around fittings. Replacing a failed O-ring promptly with the correct Viton 2-237 size restores the sealed circuit and protects the components around it.
Part Details
| Part Number | 17031 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | O-Ring Size 2-237 Viton |
Compatibility & Fitment
| Name | Model |
|---|---|
| Masonry Saws | MP200-SERIES |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
