The Multiquip 17239ZE1000 Air Filter Collar B is a genuine OEM component designed for a wide range of Multiquip and Whiteman equipment, including MVC82VHW, MVC88VTHW, MVH158GH, MVH304GSB, MVB85H, WM70S/P, WM120SH, WM120PH, MC94P/S, MC64P/S, MC44S, MC12PH, QP205SH, QP402H, QP3TH, CA4HM, MRH800GS, V305EH, and R2000H models. As a direct OEM replacement, 17239ZE1000 delivers the correct collar geometry and material grade to maintain a proper seal between the air filter housing and the engine intake. Sourced directly from Multiquip, this part meets the same specifications as the original component fitted at the factory — no guesswork, no modifications.
Key Features
- Genuine OEM Collar Seal Integrity — Engineered to the original compression tolerance, this collar creates an airtight interface between the air filter assembly and engine intake, preventing unfiltered air from bypassing the filter element.
- Broad Cross-Equipment Compatibility — A single part number that spans Multiquip plate compactors (MVC, MVH, MVB series), Whiteman and Essick mortar and concrete mixers, walk-behind trowels (CA4HM), rollers (MRH800GS, V305EH, R2000H), centrifugal pumps (QP205SH, QP402H), and trash pumps (QP3TH).
- Drop-In Fitment — Matches the original mounting diameter and collar profile, allowing direct installation without reworking the air filter housing or intake neck.
- Engine Protection Through Correct Sealing — A deteriorated or missing collar allows fine dust and debris to enter the engine intake unfiltered, accelerating cylinder and ring wear; replacing it promptly restores full air filtration effectiveness.
- Verified Multiquip Part Number — Carry part number 17239ZE1000 on your order or service record to confirm you are receiving the correct collar — not a generic substitute — for Honda-engined Multiquip equipment across multiple product families.
The air filter collar — also referred to as a filter collar or intake collar — is a formed rubber or elastomeric ring that seats and seals the air filter element or housing against the engine's carburetor or intake port. Its job is to maintain a continuous, gap-free seal so that all incoming combustion air is routed through the filter media before reaching the engine. When the collar cracks, hardens, or deforms with age, the seal breaks down and unfiltered air can pass directly into the intake, carrying abrasive particles that wear internal engine components faster than normal. Replacing a worn collar is a low-cost, high-impact maintenance step that protects the engine investment across the full range of equipment this part serves.
Part Details
| Part Number | 17239ZE1000 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Air Filter Collar B |
Compatibility & Fitment
| Name | Model |
|---|---|
| MQ Mixers | MC94P/S |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC82VH |
| Plate Compactors | MVB85H |
| Plate Compactors | MVC88VTHW |
| Plate Compactors | MVC88VTH |
| Rollers | MRH800GS |
| MQ Mixers | MC94SK/MC94PK |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Plate Compactors | MVH158GH |
| Rollers | V305EH |
| MQ Mixers | MC12PH |
| Vibrators | G55H |
| MQ Mixers | MC64P/S |
| Whiteman Mixers | WM70S/P |
| MQ Mixers | MC44S |
| Whiteman Mixers | WM120SH |
| Whiteman Mixers | WM120PH |
| Essick Mixers | EM120S Series |
| Essick Mixers | EM120P Series |
| Centrifugal Pumps | QP205SH |
| Rollers | R2000H |
| Centrifugal Pumps | QP402H |
| Plate Compactors | MVC90H |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC64VH |
| International Walk-Behind Power Trowels | CA-4-4H |
| Plate Compactors | MVH304GSB |
| Centrifugal Pumps | QP3TH |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
