The Multiquip 17410ZE0030 is a genuine OEM Air Cleaner Elbow designed for a wide range of Honda-powered Multiquip equipment including plate compactors, concrete mixers, walk-behind trowels, centrifugal pumps, and diaphragm pumps. As a direct OEM replacement, this elbow delivers the correct geometry and connection points to seat properly within the air intake path — no trimming or adaptation needed. Verified fitment includes MVC64VH, MVC64VHW, MVH-R60H, MVH-R60W, MC-42S, EC-42S, WC-42S, CMS-44S, CMS-4S, MC44S, CA4HM, CA4HC, QP2H, QP-204H, MQD2H, MQD2D3H, MQ-D206H, MQ-D305, MQ-D306HA, D306, SDP-2, SDP-3, CA90749, and CP-20H. Sourced directly from Multiquip, part 17410ZE0030 ensures consistent performance across every application it covers.
Key Features
- Genuine OEM Construction — Molded to Honda engine intake specifications, ensuring the correct bore diameter, wall thickness, and sealing surfaces that aftermarket alternatives may not replicate.
- Direct Drop-In Replacement — Matches the original elbow's mounting orientation and connection points exactly, allowing a straightforward swap during routine air filter service or engine maintenance.
- Broad Equipment Compatibility — Confirmed fitment across plate compactors (MVC64VH, MVH-R60H), concrete mixers (MC-42S, WC-42S, CMS-44S), walk-behind trowels (CA4HM, CA4HC), centrifugal pumps (QP2H, CP-20H), and diaphragm pumps (MQD2H, SDP-2, SDP-3).
- Maintains Clean Airflow to the Engine — A correctly fitted elbow keeps the air intake sealed and properly routed, preventing unfiltered air from bypassing the air cleaner and entering the combustion chamber.
- Fuel System Protection — Cracks or poor fitment in the air cleaner elbow can allow dust and debris into the engine, accelerating wear on pistons and rings; replacing a damaged elbow promptly protects long-term engine health.
The air cleaner elbow is the connecting piece between the air filter housing and the engine carburetor or intake port. Its job is to route filtered air cleanly into the engine while maintaining an airtight seal — any crack, split, or loose fit in this component allows unfiltered air to enter the engine, which accelerates internal wear and can cause rough running or hard starting. On Honda-powered equipment operating in dusty environments — such as compaction sites or concrete work — the elbow takes on added importance because even small air leaks around it can shorten engine life significantly. Replacing a worn or damaged elbow with a correct OEM part like the Multiquip 17410ZE0030 restores the integrity of the air intake system and keeps the engine running as intended.
Confirm your model number before ordering. If you need help verifying fitment for the Multiquip 17410ZE0030, contact the DHS Equipment parts team for assistance.
Part Details
| Part Number | 17410ZE0030 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Air Cleaner Elbow |
Compatibility & Fitment
| Name | Model |
|---|---|
| Concrete Mixers | MC-42S |
| Plate Compactors | MVC-64H |
| Plate Compactors | MVC-64HW |
| Plate Compactors | MVH-R60H |
| Concrete Mixers | EC-42S |
| Concrete Mixers | CMS-44S |
| Concrete Mixers | CMS-4S |
| Concrete Mixers | WC-42S |
| Plate Compactors | MVC64VH |
| Plate Compactors | MVC64VHW |
| MQ Diaphragm Pumps | MQ-D206H |
| Diaphragm Pumps | MQD2H |
| MQ Diaphragm Pumps | D306 |
| MQ Diaphragm Pumps | MQ-D306HA |
| STOW Diaphragm Pumps | SDP-2 |
| STOW Diaphragm Pumps | SDP-3 |
| MQ Centrifugal Pumps | QP-204H |
| Centrifugal Pumps | QP2H |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Power Trowels | CA4.4HM |
| Plate Compactors | MVH-R60W |
| MQ Mixers | MC44S |
| International Walk-Behind Power Trowels | CA-4-4H |
| C and CA Series | CA4HC |
| STOW Diaphragm Pumps | CA90749 |
| Diaphragm Pumps | MQD2D3H |
| MQ Diaphragm Pumps | MQ-D305 |
| STOW Centrifugal Pumps | CP-20H |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
