The Multiquip 24311000180 O-Ring P-18.0 is a genuine OEM sealing ring designed for a wide range of Multiquip rammers, plate compactors, and walk-behind rollers. This OEM component is sourced directly through the Multiquip parts program, ensuring correct material grade, cross-section, and dimensional sizing for a proper seal every time. Compatible models include MT76D, MT-76D2, MT-86D, MT-86D2, MVH-150D, MVH-150D2, MVH-200DA, MVH-200DA2, MVH206D, MVH-306DS2, MVH150VD2, MVC98D2, and MRH800DS2. When sealing integrity is critical to hydraulic or fluid systems on your compaction equipment, installing the correct OEM O-ring is the only reliable option.
Key Features
- Genuine OEM Sealing Material — Manufactured to the exact compound hardness and compression set resistance required for Multiquip compaction and rammer applications.
- Correct P-18.0 Profile — Matches the P-18.0 cross-section and inner diameter spec, seating cleanly into the designed groove without trimming or adjustment.
- Broad Model Coverage — Fits MT76D, MT-76D2, MT-86D, MT-86D2, MVH-150D series, MVH-200DA series, MVH206D, MVH-306DS2, MVH150VD2, MVC98D2, and MRH800DS2.
- Fluid System Integrity — A properly seated O-ring prevents fluid or air bypass at the sealing point, keeping pressure consistent and preventing contamination ingress.
- Critical Leak Prevention — A failed or flattened O-ring leads to fluid leaks, pressure loss, and accelerated wear on surrounding components — replacing it promptly protects the broader assembly.
An O-ring is a circular elastomeric seal that sits in a machined groove and creates a pressure-tight barrier between two mating surfaces or components. In compaction equipment and rammers, O-rings are used throughout hydraulic circuits, fuel systems, and mechanical assemblies to prevent fluid or air from escaping past joints and fittings. When an O-ring degrades — through heat cycling, chemical exposure, or compression set — it loses its ability to seal, resulting in leaks, inconsistent system pressure, and potential damage to adjacent components. Replacing a worn O-ring with the correct OEM part restores the seal to its original specification and prevents further deterioration of the surrounding assembly.
For questions about fitment or to confirm this is the right part for your machine, contact the DHS Equipment parts team before ordering.
Part Details
| Part Number | 24311000180 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | O-Ring P-18.0 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rammers | MT76D |
| Rammers | MT-76D2 |
| Rammers | MT-86D2 |
| Plate Compactors | MVH-150D |
| Plate Compactors | MVH-150D2 |
| Plate Compactors | MVH-200DA |
| Plate Compactors | MVH206D |
| Rollers | MRH800DS2 |
| Rammers | MT-86D |
| Plate Compactors | MVC98D2 |
| Plate Compactors | MVH150VD2 |
| Plate Compactors | MVH-200DA2 |
| Plate Compactors | MVH-306DS2 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
