The Multiquip 24341000224 O-Ring 1A S-22.4 is a genuine OEM seal designed for a wide range of Multiquip equipment including the MDR-9DYE power trowel, MT76D and MT-86D rammers, MVC98D2 and MVH series plate compactors, QP3TY trash pump, and MRH-800DS rollers. As a factory-sourced component, this O-ring meets the original material and dimensional specifications required for a proper, leak-free seal across all compatible models. Sourced directly through authorized Multiquip OEM channels, part 24341000224 ensures you are installing the correct seal the first time. DHS Equipment stocks this part to keep your equipment running without unnecessary delays.
Key Features
- Genuine OEM Sealing Material — Manufactured to the exact elastomer compound and cross-section tolerances specified by Multiquip, ensuring correct compression and long-term sealing integrity.
- Drop-In Dimensional Fit — The 1A S-22.4 sizing matches the original groove geometry on all compatible assemblies, so the ring seats correctly without stretching or pinching during installation.
- Broad Equipment Compatibility — Fits the MDR-9DYE, MT76D, MT-76D2, MT-86D, MT-86D2, MVC98D2, MVH-150D, MVH-200DA, MVH-306D, MVH-406DSY, QP3TY, MRH-800DS, and additional models in the MVH and MRH families.
- Leak Prevention Across Fluid Systems — A correctly installed O-ring maintains pressure boundaries and prevents fluid migration, keeping oil, fuel, or hydraulic fluid contained where it belongs.
- Fluid System Safety — A compromised O-ring can allow fuel or hydraulic fluid to escape near heat sources; replacing a worn seal with a genuine OEM part addresses this risk directly.
An O-ring is a precision-molded loop of elastomer that creates a static or dynamic seal between two mating surfaces, preventing fluid or air from escaping a pressurized system. In compaction, pumping, troweling, and rolling equipment, these seals are found in fuel systems, hydraulic circuits, and engine assemblies where maintaining a tight boundary is essential to consistent output and operator safety. When an O-ring degrades — through heat cycling, chemical exposure, or physical compression set — it can weep or fail outright, leading to fluid loss, pressure drop, and potential contamination of surrounding components.
Part Details
| Part Number | 24341000224 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | O-Ring 1A S-22.4 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Power Trowels | MDR-9DYE |
| Rammers | MT76D |
| Rammers | MT-76D2 |
| Rammers | MT-86D |
| Rammers | MT-86D2 |
| Plate Compactors | MVC98D2 |
| Plate Compactors | MVH-150D |
| Plate Compactors | MVH-150D2 |
| Plate Compactors | MVH150VD2 |
| Plate Compactors | MVH-200DA |
| Plate Compactors | MVH-200DA2 |
| Plate Compactors | MVH206D |
| Plate Compactors | MVH-304DSB |
| Plate Compactors | MVH-306D |
| Plate Compactors | MVH-306DS |
| Plate Compactors | MVH-306DS2 |
| Plate Compactors | MVH-402DSB |
| Plate Compactors | MVH-406DSY |
| MQ Trash Pumps | QP3TY |
| Rollers | MRH-800DS |
| Rollers | MRH800DS2 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Multiquip