The Multiquip 26106080122 is a genuine OEM Bolt M8 x 12 Plated designed for a wide range of Multiquip reversible plate compactors, single-directional plate compactors, rammers, rollers, ride-on trowels, and trash pumps. As a factory-sourced fastener, 26106080122 delivers the exact thread pitch, plating specification, and head geometry required by the original equipment design. Confirmed fitment includes MVH-150D, MVH-150D2, MVH-200DA, MVH-200DA2, MVH-206D, MVH-304DSB, MVH-306D, MVH-306DS, MVH-306DS2, MVH-402DSB, MVH-406DSY, MVC98D2, MT76D, MT-76D2, MT-86D, MT-86D2, MRH800DS2, MRH-800DS, MDR-9DYE, and QP3TY. Sourcing the correct OEM fastener eliminates the risk of stripped threads, loosened assemblies, or premature hardware failure in demanding compaction and pumping applications.
Key Features
- Genuine OEM Plating Integrity — Factory zinc plating provides corrosion resistance matched to the original hardware specification, maintaining thread integrity across wet and dusty field conditions.
- Exact M8 x 12 Thread and Length — Correct thread class and body length ensure full thread engagement in the host casting or bracket without bottoming out or under-torquing.
- Broad Cross-Family Fitment — A single part number covers MVH reversible plate compactors, MVC single-directional compactors, MT-series rammers, MRH walk-behind rollers, MDR ride-on trowels, and QP trash pumps.
- Structural Fastener Confidence — Used in vibration-intensive assemblies, a correctly spec'd bolt maintains clamping load through sustained high-cycle compaction and pump operation where undertorqued or mismatched hardware can back out.
- Safety-Critical Retention — In plate compactor exciter housings and rammer drive assemblies, fastener failure can lead to component separation under load — using the correct OEM bolt is essential to operator safety.
A Bolt M8 x 12 Plated is a metric fastener used to clamp and retain structural components, covers, brackets, and housings throughout the machine. The zinc plating resists rust and galvanic corrosion, which is especially important on equipment exposed to water, concrete slurry, and soil. When a bolt stretches, corrodes, or is replaced with an incorrect length or thread grade, the joint loses clamping force — leading to vibration-induced loosening, component misalignment, or outright separation during operation.
For questions about fitment or to confirm this is the right part for your machine, contact the DHS Equipment parts team before ordering.
Part Details
| Part Number | 26106080122 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Bolt M8 x 12 Plated |
Compatibility & Fitment
| Name | Model |
|---|---|
| Plate Compactors | MVH-150D |
| Plate Compactors | MVH150VD2 |
| Plate Compactors | MVH-200DA |
| Plate Compactors | MVH-306D |
| Plate Compactors | MVH-306DS |
| Plate Compactors | MVH-306DS2 |
| Plate Compactors | MVH-406DSY |
| Rollers | MRH800DS2 |
| Power Trowels | MDR-9DYE |
| Rammers | MT76D |
| Rammers | MT-76D2 |
| Rammers | MT-86D |
| Rammers | MT-86D2 |
| Plate Compactors | MVC98D2 |
| Plate Compactors | MVH-150D2 |
| Plate Compactors | MVH-200DA2 |
| Plate Compactors | MVH206D |
| Plate Compactors | MVH-304DSB |
| Plate Compactors | MVH-402DSB |
| MQ Trash Pumps | QP3TY |
| Rollers | MRH-800DS |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Multiquip