The Multiquip 28441ZH8003 is a genuine OEM Friction Spring designed for a broad range of Multiquip, Whiteman, Essick, and STOW equipment. This is a direct OEM replacement sourced from Multiquip, ensuring correct specification and compatibility across plate compactors, concrete and mortar mixers, masonry saws, pumps, walk-behind trowels, generators, and more. Compatible models include MVC-64H, MVC-70HW, MVH-120GH, MVH-150GH, WM70, MC-42S, MC-64S, EC-42S, QP-202TH, MS18H5.5, CA4HM, and many additional machines across the Multiquip portfolio. Because this spring is shared across such a wide equipment range, always confirm your model code before ordering.
Key Features
- Genuine OEM Spring Tension: — Manufactured to the exact load rating and free-length specification required across the Multiquip equipment range, so the spring delivers consistent friction control from day one.
- Drop-In Replacement: — Matches the original mounting points and hook geometry, allowing straightforward installation without machining or modification to adjacent components.
- Broad Cross-Equipment Compatibility: — A single verified part number covering plate compactors (MVC, MVH series), mortar and concrete mixers (WM70, MC, EC, CMS, WC series), masonry saws (MS, MP series), diaphragm and trash pumps (MQ-D, QP series), walk-behind trowels (CA, JA, J series), and portable generators.
- Maintains Consistent Friction Control: — A correctly tensioned friction spring keeps throttle, governor, or engagement mechanisms operating smoothly; a fatigued or broken spring leads to erratic speed control, slipping engagement, or loss of governor response.
- OEM Part Number Assurance: — Supplied under Multiquip part number 28441ZH8003, so you can match it directly against your parts manual or service bulletin without guesswork.
A friction spring is a small but critical tensioning component used throughout construction equipment to maintain controlled resistance in governor linkages, throttle assemblies, clutch engagement mechanisms, and similar moving systems. It works by applying a calibrated spring load that keeps linked components in steady contact or returns them to a neutral position after actuation. When a friction spring loses tension through metal fatigue, corrosion, or physical damage, the result is typically inconsistent engine speed, slipping or dragging engagement, or a governor linkage that hunts and surges rather than holding a steady setting. Replacing a worn friction spring with the correct OEM part restores the designed operating response and protects the surrounding linkage components from accelerated wear.
Part Details
| Part Number | 28441ZH8003 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Friction Spring |
Compatibility & Fitment
| Name | Model |
|---|---|
| Vibrators | G55H |
| Portable Generators | GA-2.5H |
| Portable Generators | GAC2.2H |
| Welders | GAW135H |
| Concrete Mixers | MC-42S |
| Mixers | MC-64S |
| Mixers | MC-64P |
| Saws | MP1H |
| Saws | MP115E |
| Saws | MP120E |
| Plate Compactors | MVC-64HW |
| Plate Compactors | MVC-70HW |
| Plate Compactors | MVC77 |
| Plate Compactors | MVC-88GH |
| Plate Compactors | MVH-120GH |
| Plate Compactors | MVH-150D |
| Plate Compactors | MVH-R60W |
| Mixers | MC3H |
| Concrete Mixers | EC-42S |
| Concrete Mixers | MC-62P |
| Concrete Mixers | CMS-44S |
| Concrete Mixers | WC-42S |
| Portable Mixers | MS15H5.5 |
| Masonry Saws | MS18H5.5 |
| Masonry Saws | MS18H8 |
| Masonry Saws | MS18E |
| Portable Mixers | MS45E |
| Masonry Saws | MS-63 |
| Mixers | WM-70P |
| MQ Diaphragm Pumps | MQ-D206H |
| Diaphragm Pumps | MQD2D3H |
| MQ Diaphragm Pumps | MQ-D306HA |
| STOW Diaphragm Pumps | SDP-2 |
| STOW Centrifugal Pumps | CP-30H |
| Centrifugal Pumps | QP205SH |
| MQ Trash Pumps | QP-202TH |
| Trash Pumps | QP2TH |
| STOW Trash Pumps | T-20H |
| Saws | MP1455H |
| Saws | MP1415E |
| STOW Masonry Saws | MS1415E |
| STOW Masonry Saws | MS1420E |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| MQ Mixers | MC64P/S |
| Mixers | WM70S/P |
| Saws | SCT36 |
| Walk-Behind Trowels | EPOXY-SERIES |
| Walk-Behind Trowels | C-4 |
| Power Trowels | CA4.4HM |
| Walk-Behind Trowels | J-SERIES |
| Saws | SCT36ANDSCT46 |
| STOW Diaphragm Pumps | CA90749 |
| Plate Compactors | MVC-64H |
| Plate Compactors | MVC-70H |
| Plate Compactors | MVC-88GHW |
| Plate Compactors | MVC90H |
| Plate Compactors | MVH-150GH |
| Diaphragm Pumps | MQD2H |
| MQ Diaphragm Pumps | MQ-D305 |
| MQ Diaphragm Pumps | D306 |
| STOW Diaphragm Pumps | SDP-3 |
| STOW Centrifugal Pumps | CP-20H |
| MQ Centrifugal Pumps | QP-204H |
| Centrifugal Pumps | QP303H |
| Concrete Saws | SFCG1 |
| International Walk-Behind Power Trowels | CA-4-4H |
| C and CA Series | CA4HC |
| Walk-Behind Trowels | JA-SERIES |
| Plate Compactors | MVH-R60H |
| Portable Mixers | MC3SE |
| Concrete Mixers | EC-62S |
| Concrete Mixers | EC-62P |
| MQ Mixers | MC44S |
| Concrete Mixers | MC-62S |
| Concrete Mixers | CMS-4S |
| Concrete Mixers | CMS-64S |
| Concrete Mixers | CMS6S |
| Concrete Mixers | WC-62S |
| Concrete Mixers | WC-62P |
| ESSICK Plaster-Mortar Mixers | EM-70S |
| ESSICK Plaster-Mortar Mixers | EM-70P |
| Portable Mixers | MS15E |
| Portable Mixers | MS45H5.5 |
| Mixers | WM-70S |
| Concrete Saws | FCG1-6HA |
| Concrete Saws | FCG1 |
| Masonry Saws | MASONPROMP1 |
| Saws | MP1420E |
| STOW Masonry Saws | TRAK-14 |
| STOW Masonry Saws | MS1455H |
| Saws | MP1455HP |
| Saws | SCT46 |
| Heavy Duty Series | HPHA36C5H |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
