The Multiquip 28462ZE2W11 is a genuine OEM Recoil Starter Rope designed for equipment powered by the GX160K1QX2 and GX160U1QX2 Honda engines. As a direct OEM replacement sourced through Multiquip's authorized parts program, this rope is manufactured to the exact specification of the original component. It is confirmed to fit a broad range of Multiquip equipment families including QP2TH, QP3TH, QP3THX, and QPT205SLT pumps; MC64P/S, MC94P/S, MC94SK, and MC94PK mixers; WM70S/P, WM70SLF, WM70PLF, WM90S/P, EM70P/S, EM90P/S, and EM120 mixers; MVH208GH and MVH308GH plate compactors; BS90C, BH11C, BH90C, JS60C, JH90C, JH55C, BS46H11, BS46H90, JS36H90, JS36H55, and B46 walk-behind trowels; WSHE-A Series screeds; GAC3.6HR, GA3.6HR, GA3.6HA, and GA3.6HZ generators; MP2090HP, MP2050E3, MP2050E1, MP2H, MP275E3, MP25E3, and MP25E1 masonry saws; R2000H roller; QP402H centrifugal pump; G55H vibrator; and J36-M30 ride-on trowel. Verify your engine model code before ordering to ensure correct fit.
Key Features
- OEM-Grade Rope Material — Manufactured to the same tensile strength and diameter spec as the original Honda GX160K1QX2 and GX160U1QX2 starter rope, ensuring consistent pull resistance and long service life.
- Direct Drop-In Replacement — Routes through the recoil starter housing exactly as the original, with no trimming or resizing needed during installation.
- Broad Cross-Equipment Compatibility — A single part number covering trash pumps, centrifugal pumps, mixers, plate compactors, walk-behind trowels, screeds, masonry saws, rollers, vibrators, and generators across multiple Multiquip product families.
- Consistent Cold and Hot Start Performance — A properly tensioned, intact starter rope delivers a full-stroke pull every time, supporting reliable engine cranking across varying site conditions and temperatures.
- Genuine Multiquip OEM Part — Supplied as a genuine OEM component backed by Multiquip's authorized parts network, so you know the rope matches the recoil mechanism geometry of your specific engine variant.
The recoil starter rope is the pull cord that engages the recoil starter mechanism to crank the engine manually. When the operator pulls the handle, the rope unwinds from the recoil drum, spins the starter cup, and turns the engine crankshaft to initiate combustion. Over time, repeated use causes the rope to fray, weaken, or snap — a worn rope can prevent the engine from starting entirely, halting work until it is replaced. Swapping in the correct OEM rope restores full pull length and grip, keeping the starter assembly operating as intended.
Part Details
| Part Number | 28462ZE2W11 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Recoil Starter Rope |
Compatibility & Fitment
| Name | Model |
|---|---|
| Trash Pumps | QP2TH |
| MQ Mixers | MC94P/S |
| MQ Mixers | MC64P/S |
| Whiteman Mixers | WM70S/P |
| Trash Pumps | QP3THX |
| Plate Compactors | MVH308GH |
| Plate Compactors | MVH208GH |
| Whiteman Mixers | WM90S/P |
| MQ Mixers | MC94SK/MC94PK |
| International Walk-Behind Power Trowels | BS90C |
| Whiteman Walk-Behind Power Trowels | BH11C |
| Whiteman Walk-Behind Power Trowels | BH90C |
| Vibratory Screeds | WSHE-A Series |
| Gasoline Powered Generators | GAC3.6HR |
| International Walk-Behind Power Trowels | JS60C |
| Whiteman Walk-Behind Power Trowels | JH90C |
| Whiteman Walk-Behind Power Trowels | JH55C |
| Whiteman Walk-Behind Power Trowels | B46 |
| Centrifugal Pumps | QPT205SLT |
| Trash Pumps | QP205SLT |
| Whiteman Mixers | WM70SLF |
| Whiteman Mixers | WM70PLF |
| Essick Mixers | EM120 |
| Gasoline Powered Generators | GA3.6HR |
| Trash Pumps | QP3TH |
| International Walk-Behind Power Trowels | BS46H11 |
| International Walk-Behind Power Trowels | BS46H90 |
| International Walk-Behind Power Trowels | JS36H90 |
| International Walk-Behind Power Trowels | JS36H55 |
| Saws | MP2090HP |
| Saws | MP2050E3 |
| Saws | MP2050E1 |
| Saws | MP2H |
| Saws | MP275E3 |
| Saws | MP25E3 |
| Saws | MP25E1 |
| Rollers | R2000H |
| Trash Pumps | QP402H |
| Essick Mixers | EM70P/S |
| Essick Mixers | EM90P/S |
| Gasoline Powered Generators | GA3.6HA |
| Gasoline Powered Generators | GA3.6HZ |
| Vibrators | G55H |
| Whiteman Ride-On Power Trowels | J36-M30 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
