The Multiquip 29173 is a genuine OEM Push Pull Switch designed for a wide range of Multiquip, Essick, and Whiteman mixers and masonry saws. As a direct OEM replacement, part 29173 is manufactured to the same standards as the original component, ensuring a correct, trouble-free installation on compatible equipment. This switch fits an extensive list of models across the Essick plaster and mortar mixer lines, Whiteman mixer series, MQ concrete mixers, and Multiquip masonry saws — including EM-90S, EM-90P, MC64SH, MC94SH, WM70SH8, WM90SH8, MS18H8, MS30H, and many more. When you order part 29173 from DHS Equipment, you receive the exact OEM component your machine was built with.
Key Features
- Genuine OEM Electrical Specification — Manufactured to the original switching specification, so the actuator travel, contact rating, and circuit behavior match what your machine's wiring harness expects.
- Direct Drop-In Installation — Engineered to the same mounting dimensions and terminal configuration as the factory switch, connecting directly to the existing harness without adapter work.
- Broad Mixer and Saw Compatibility — Fits Essick EM and PRO series mixers, Whiteman WM series mixers, MQ MC series concrete mixers, and Multiquip MS series masonry saws — covering both steel and poly drum variants across gas, electric, and LF engine configurations.
- Restores Positive On/Off Control — A worn or failed push pull switch causes erratic start/stop behavior or complete loss of operator control. Replacing it with part this part restores clean, positive switching action.
- Operator Safety Relevance — The push pull switch is a primary operator control on these machines; using a correctly rated OEM replacement maintains the intended safety and control characteristics of the equipment.
The push pull switch is the main power control on mixers and masonry saws in this equipment family, allowing the operator to start and stop the machine through a simple, direct-action switch mechanism. Over time, the internal contacts can wear, corrode, or fail, leading to intermittent operation, failure to start, or an inability to shut the machine down cleanly. Replacing a faulty switch promptly is essential for both productivity and safe machine operation.
Part Details
| Part Number | 29173-001 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Push Pull Switch |
Compatibility & Fitment
| Name | Model |
|---|---|
| Mixers | EM-90S |
| Mixers | EM-90P |
| ESSICK Plaster-Mortar Mixers | EM12M |
| ESSICK Plaster-Mortar Mixers | EM12ME51 |
| ESSICK Plaster-Mortar Mixers | EM12ME53 |
| MQ Concrete Mixers | MC44SH |
| MQ Concrete Mixers | MC44SE |
| MQ Concrete Mixers | MC-64S |
| MQ Concrete Mixers | MC-64P |
| MQ Concrete Mixers | MC44S |
| MQ Concrete Mixers | MC94S |
| MQ Concrete Mixers | MC94P |
| Concrete Mixers | C10SH8 |
| Concrete Mixers | C10PH8 |
| Concrete Mixers | CMS-44S |
| Concrete Mixers | CMS-64S |
| Concrete Mixers | CMS-94S |
| ESSICK Plaster-Mortar Mixers | EM-70S |
| ESSICK Plaster-Mortar Mixers | EM-70P |
| Mixers | EM120P |
| Mixers | EM120S |
| Masonry Saws | MS18H5.5 |
| Masonry Saws | MS18H8 |
| Masonry Saws | MS18E |
| Masonry Saws | MS20H |
| Masonry Saws | MS20E |
| Masonry Saws | MS30H |
| Masonry Saws | MS30E |
| Masonry Saws | MS-63 |
| Masonry Saws | MS-70 |
| Masonry Saws | MS-93 |
| Masonry Saws | MS120H13 |
| Masonry Saws | MS120HD13 |
| Mixers | WM120PH |
| Mixers | WM120SH |
| Mixers | WM-70S |
| Mixers | WM-70P |
| Mixers | WM70SH5C |
| Mixers | WM70SH8C |
| Mixers | WM-90S |
| Mixers | WM-90P |
| MQ Concrete Mixers | MC64SK |
| MQ Concrete Mixers | MC64PK |
| MQ Concrete Mixers | MC94SK |
| MQ Concrete Mixers | MC94PK |
| MQ Concrete Mixers | MC12PH |
| MQ Concrete Mixers | MC64SH |
| MQ Concrete Mixers | MC64PH |
| MQ Concrete Mixers | MC64SE |
| MQ Concrete Mixers | MC64PE |
| MQ Concrete Mixers | MC94SH |
| MQ Concrete Mixers | MC94PH |
| MQ Concrete Mixers | MC94SE |
| MQ Concrete Mixers | MC94PE |
| Essick Mixers | EM120 |
| Essick Mixers | EM70SLF |
| ESSICK Plaster-Mortar Mixers | EM90SH8 |
| ESSICK Plaster-Mortar Mixers | EM90PH8 |
| ESSICK Plaster-Mortar Mixers | EM90SE |
| ESSICK Plaster-Mortar Mixers | EM90PE |
| Essick Mixers | EM90SLF |
| Mixers | WM63H5 |
| Mixers | WM63H8 |
| Mixers | WM63E |
| Mixers | WM63SLF |
| Mixers | WM70SH5 |
| Mixers | WM70PH5 |
| Mixers | WM70SH8 |
| Mixers | WM70PH8 |
| Mixers | WM70SE |
| Mixers | WM70PE |
| Mixers | WM70SLF |
| Mixers | WM70PLF |
| Mixers | WM90SH8 |
| Mixers | WM90PH8 |
| Mixers | WM90SE |
| Mixers | WM90PE |
| Mixers | WM90SLF |
| Mixers | WM90PLF |
| Mixers | WM45H |
| Mixers | WM45E |
| Mixers | WM45HCE |
| Essick Mixers | PRO12 |
| Essick Mixers | PRO12E51 |
| Essick Mixers | PRO12E53 |
| Hydraulic Plaster/Mortar Mixers | PRO12E53-460V |
| Stationary Mixers | PRO12C |
| Stationary Mixers | PRO12E51C |
| Stationary Mixers | PRO12E53C |
| Stationary Mixers | PRO12E53-460VC |
| Essick Mixers | PRO20 |
| Essick Mixers | EM120P Series |
| Essick Mixers | EM120S Series |
| Essick Mixers | EM12M Series |
| Essick Mixers | EM70P/S |
| Essick Mixers | EM90P/S |
| MQ Concrete Mixers | MC64P/S |
| MQ Concrete Mixers | MC64SK/MC64PK |
| MQ Concrete Mixers | MC94P/S |
| MQ Concrete Mixers | MC94SK/MC94PK |
| Mixers | WM45HE |
| Mixers | WM70S/P |
| Mixers | WM90S/P |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
