The Multiquip 31100ZE1010 Flywheel is a genuine OEM Flywheel designed for a wide range of Multiquip and Whiteman equipment, including MVC82VHW, MVC82VH, MVC90H plate compactors, MC64P/S mixers, WM70S/P Whiteman mixers, QP205SH centrifugal pumps, MP1455HP, MP120E, MP115E, and MP1H masonry saws, and G55H vibrators. As a direct OEM part, it is manufactured to the exact specification of the original component, ensuring a correct installation with no guesswork on compatibility. DHS Equipment supplies this part as a stocked OEM replacement, so you can get your equipment back to work with confidence. Verify your model code against the fitment list above before ordering to confirm this is the right flywheel for your machine.
Key Features
- OEM-Matched Mass and Balance: — Manufactured to the original rotational mass and balance specification, ensuring the engine runs smoothly without vibration-induced wear on crankshaft bearings or seals.
- Direct Bolt-On Installation: — Machined to match the original crankshaft taper, keyway, and bolt pattern, so the flywheel seats and torques correctly without rework or shimming.
- Broad Fitment Across Multiquip Equipment Lines: — Confirmed fit for MVC82VHW, MVC82VH, MVC90H plate compactors, MC64P/S and WM70S/P mixers, QP205SH pumps, MP-series masonry saws, and G55H vibrators.
- Restores Proper Engine Starting and Ignition Timing: — The flywheel carries the magneto magnets that trigger the ignition system; a cracked, worn, or off-spec flywheel causes hard starting, misfires, and erratic engine behavior.
- Ignition System Safety: — Correct flywheel geometry maintains proper magnet-to-coil air gap, which is critical for consistent spark timing and safe, predictable engine operation across all listed equipment types.
The flywheel is a heavy rotating disc bolted to the end of the engine crankshaft. Its primary job is to store rotational energy and smooth out the power pulses from each combustion stroke, keeping the engine running evenly between firing cycles. On small gasoline engines like those found across Multiquip plate compactors, mixers, pumps, saws, and vibrators, the flywheel also carries permanent magnets that pass a stationary ignition coil to generate the spark for combustion. A flywheel that is cracked, has damaged magnets, or has lost its correct balance will cause rough running, ignition failure, or hard starting — and in severe cases can become a serious safety hazard due to the high rotational forces involved.
Part Details
| Part Number | 31100ZE1010 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Flywheel |
Compatibility & Fitment
| Name | Model |
|---|---|
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC82VH |
| MQ Mixers | MC64P/S |
| Whiteman Mixers | WM70S/P |
| Centrifugal Pumps | QP205SH |
| Saws | MP1455HP |
| Saws | MP120E |
| Saws | MP115E |
| Saws | MP1H |
| Plate Compactors | MVC90H |
| Vibrators | G55H |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
