The Multiquip 50149100 is a genuine OEM Allen Screw M6X12 1D81Z designed for MVH308DZ, MVH408DZ, and MVH508DZ reversible plate compactors, as well as RW1404MR and RW1504HF walk-behind rollers. As a direct Multiquip OEM part, the 50149100 is manufactured to the exact thread pitch, head geometry, and material grade specified for these machines — ensuring a correct seating installation with no guesswork. Sourced directly through authorized channels, this screw is the same component installed at the factory and is the recommended replacement whenever the original is damaged, stripped, or lost during service. DHS Equipment stocks genuine Multiquip OEM parts to help you get your equipment back in service with the correct hardware every time.
Key Features
- Correct Thread Specification — M6X12 threading matches the original tapped holes exactly, preventing cross-threading or fastener failure under vibration.
- Genuine OEM Hardware — Produced to Multiquip's original material and hardness grade, this Allen screw delivers the same clamp load and shear resistance as the factory-installed part.
- Broad Fitment Across Two Equipment Families — Compatible with MVH308DZ, MVH408DZ, and MVH508DZ reversible plate compactors and RW1404MR and RW1504HF walk-behind rollers, covering a wide range of Multiquip equipment.
- Vibration-Resistant Retention — Compactors and rollers generate sustained mechanical vibration; using the correct OEM-spec fastener helps maintain proper torque retention over the service life of the machine.
- Direct Service Replacement — Installs using a standard hex key into the existing socket — no drilling, tapping, or thread repair required when replacing a like-for-like fastener.
An Allen screw — also known as a socket head cap screw — is a threaded fastener driven by a hex key inserted into a recessed socket in the head. On plate compactors and walk-behind rollers, Allen screws are used to secure covers, housings, guards, and internal assemblies that must stay firmly in place during continuous vibration and heavy operational loads. A worn, stripped, or missing fastener in these locations can allow components to shift or loosen, leading to accelerated wear on mating parts or an unsafe operating condition. Replacing a damaged Allen screw with the correct OEM-spec part restores the designed clamping force and keeps critical assemblies properly secured.
Questions about fitment or part compatibility? Contact the DHS Equipment team for expert assistance before ordering.
Part Details
| Part Number | 50149100 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Allen Screw M6X12 1D81Z |
Compatibility & Fitment
| Name | Model |
|---|---|
| Plate Compactors | MVH308DZ |
| Plate Compactors | MVH408DZ |
| Plate Compactors | MVH508DZ |
| Rollers | RW1404MR |
| Rollers | RW1404MR S/N 326075 and up |
| Rollers | RW1504HF up to S/N 1534188 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
