The Multiquip 5017 is a genuine OEM Allen Screw M8X25 designed for a range of Multiquip plate compactors, rollers, and trash pumps. This fastener is sourced directly from Multiquip to ensure exact dimensional compliance with the hardware specifications of each compatible machine. Confirmed fitment includes the MVH308DZ, MVH408DZ, and MVH508DZ reversible plate compactors, RW1404, RW1404MR, and RW1504HF walk-behind rollers, and QP2TZ and QP3TZ trash pumps. Ordering by part number 5017 ensures you receive the correct M8x25 socket-head cap screw without guesswork or adaptation.
Key Features
- Genuine OEM Fastener Grade — Manufactured to Multiquip's exact thread pitch, head profile, and tensile specification for the M8x25 socket-head format, so clamp loads are consistent at every torqued joint.
- Direct Drop-In Installation — Matches the existing threaded bosses and socket-head hex drive on compatible machines, installing with a standard hex key and no thread chasing or reworking.
- Broad Cross-Family Fitment — A single part number covers MVH308DZ, MVH408DZ, MVH508DZ plate compactors, RW1404, RW1404MR, RW1504HF rollers, and QP2TZ and QP3TZ trash pumps.
- Structural Integrity at High-Vibration Points — On compactors and rollers, loose or incorrect fasteners allow panels, guards, and assemblies to shift under continuous vibration; the correct OEM screw maintains the clamping force those joints require.
- Critical for Fluid-System Enclosures — On QP series trash pumps, fasteners that are under-spec or improperly sized can compromise housing alignment and seal compression; this OEM screw maintains the designed fit at pump enclosure joints.
An Allen screw — also called a socket-head cap screw — is a threaded fastener tightened with a hex key inserted into a recessed drive in the bolt head. The M8x25 designation identifies an 8 mm thread diameter and 25 mm thread length, placing this screw in the medium-duty structural fastener range commonly used to secure covers, guards, brackets, and housing assemblies on compaction and pumping equipment. When a screw of this type stretches, strips, or is replaced with an incorrect size, the joint loses its designed clamping load, which on vibrating equipment can lead to loosening, misalignment, or component damage over time. Using the correct OEM replacement maintains the integrity of the bolted joint through the full service life of the machine.
Verify your model number and serial number against the fitment list before ordering. For fitment questions, contact the DHS Equipment team for assistance.
Part Details
| Part Number | 5017 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Allen Screw M8X25 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Plate Compactors | MVH308DZ |
| Plate Compactors | MVH408DZ |
| Plate Compactors | MVH508DZ |
| Rollers | RW1404 |
| Rollers | RW1404MR |
| Rollers | RW1404MR S/N 326075 and up |
| Rollers | RW1504HF up to S/N 1534188 |
| Trash Pumps | QP2TZ |
| Trash Pumps | QP3TZ |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
