The Multiquip 50224200 Circlip 16X1 2G40 is a genuine OEM retaining clip designed for RAMMAX walk-behind rollers, specifically the RW1404MR (S/N 326075 and up) and RW1504HF (up to S/N ). Sourced directly from Multiquip, this circlip meets the exact dimensional and material standards of the original component installed at the factory. Ordering by part number 50224200 ensures you receive the correct clip for your machine's serial number range — a critical detail for proper fit and function on these RAMMAX roller models.
Key Features
- OEM-Grade Material and Sizing — Manufactured to the exact 16x1 specification, delivering the correct spring tension and retention force required to secure rotating or sliding components without slippage or distortion.
- Direct-Fit Replacement — Seats into the machined groove as intended, requiring no filing, bending, or adjustment during installation.
- Confirmed Fitment for RAMMAX Rollers — Verified for the RW1404MR (S/N 326075 and up) and RW1504HF (up to S/N 1534188); always cross-reference your serial number before ordering.
- Retains Critical Drive Components — A correctly seated circlip prevents axial movement of shafts, bearings, or gears; a worn or missing clip can allow components to shift and cause accelerated internal wear.
- Genuine Multiquip OEM Part — Supplied through the authorized Multiquip parts chain, so the specification, hardness, and finish match what the machine was built with.
A circlip — also called a retaining ring or snap ring — is a small but essential fastener that locks into a machined groove on a shaft or inside a bore to prevent lateral movement of an adjacent component such as a bearing, gear, or pulley. In a walk-behind vibratory roller like the RW1404MR or RW1504HF, these clips hold drivetrain and drum components in their correct axial position under continuous vibration and load. When a circlip fatigues, deforms, or goes missing, the retained component can shift out of position, leading to uneven drum contact, bearing damage, or more extensive drivetrain failure that far exceeds the cost of the clip itself.
For questions about fitment or to confirm compatibility with your specific serial number, contact the DHS Equipment parts team before placing your order.
Part Details
| Part Number | 50224200 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Circlip 16X1 2G40 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rollers | RW1404MR S/N 326075 and up |
| Rollers | RW1504HF up to S/N 1534188 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
