The Multiquip 5028 is a genuine OEM Cotter Pin 1/8 x 2.00 designed for MVH308DZ, MVH408DZ, MVH508DZ, RW1404, RW1404MR, and RW1504HF series equipment. As a direct OEM component sourced through Multiquip's authorized parts network, part 5028 meets the exact dimensional and material specifications required for proper retention in these machines. DHS Equipment stocks this pin to keep your reversible plate compactors and walk-behind rollers operating with correctly secured fasteners and linkage components. Confirm your model and serial number against the fitment list before ordering to ensure a direct match.
Key Features
- Genuine OEM Material Grade — Manufactured to Multiquip's specified diameter and length tolerances, ensuring the pin seats and bends correctly without fracturing during installation.
- Direct-Fit Retention — Sized at 1/8 x 2.00 to drop into existing clevis pins, linkage shafts, and axle assemblies without reworking the surrounding hardware.
- Broad Model Coverage — Fits MVH308DZ, MVH408DZ, MVH508DZ reversible plate compactors and RW1404, RW1404MR, and RW1504HF walk-behind rollers, including specific serial number ranges.
- Critical Retention Function — A correctly installed cotter pin locks pins and bolts in place under vibration; a missing or failed pin allows fasteners to back out, leading to component separation during operation.
- Safety-Critical Fastener — Used in linkage and axle retention points where fastener loss can result in loss of machine control — always replace with a new OEM-spec pin after any disassembly.
A cotter pin is a split fastener inserted through a drilled hole in a bolt, clevis pin, or shaft to prevent the fastener from backing out under load or vibration. On plate compactors and walk-behind rollers, cotter pins secure axle pins, linkage pivots, and control rod connections that are subject to continuous vibration during normal use. When a cotter pin shears, corrodes, or goes missing, the retained component is free to shift or disengage, which can result in uncontrolled movement, accelerated wear on surrounding hardware, or a complete loss of the affected assembly. Replacing a worn or missing cotter pin with the correct OEM part is one of the simplest and most important steps in keeping these machines mechanically sound.
Part Details
| Part Number | 5028 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Cotter Pin 1/8 x 2.00 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Plate Compactors | MVH308DZ |
| Plate Compactors | MVH408DZ |
| Plate Compactors | MVH508DZ |
| Rollers | RW1404 |
| Rollers | RW1404MR |
| Rollers | RW1404MR S/N 326075 and up |
| Rollers | RW1504HF up to S/N 1534188 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Wacker Neuson
Wacker Neuson Part # 5000155182 - Pin-Cotter 1/8 X 2.00 Zp - Genuine OEM Part
