Multiquip 60028 Fuel Hose 50 PSI (39.96"/3.33')

The Multiquip 60028 is a genuine OEM Fuel Hose 50 PSI (39.96"/3.33') designed for a wide range of Multiquip and Whiteman equipment including MD105, MD80, STX55, HTX44, HTN, HHNG5, and additional models across the ride-on trowel, roller screed, trash pump, light tower, and flat saw families. As a direct OEM component, it meets the original pressure and dimensional specifications set for these machines at the factory. Verify your model against the fitment list to confirm compatibility before ordering.

Key Features

• 50 PSI Pressure Rating: — Built to handle the fuel delivery demands of the engines used across Multiquip's ride-on trowel and multi-equipment lineup without seeping or softening under operating pressure.
• OEM-Specified Length: — At 39.96" (3.33'), this hose matches the original routing path, allowing it to connect at the correct end points without cutting, splicing, or adapting.
• Genuine Multiquip OEM Part: — Sourced directly from Multiquip, part number 60028 carries the same material and construction spec as the hose installed at the factory, ensuring compatibility with the fuel system it feeds.
• Broad Cross-Family Fitment: — Fits MD105, MD80, STX55Y6, STX55J6, HTX44K4, HTX44K5, HTX44Y4, HTX44Y5, HTN27K, HTN28K, HHNG5, HHXD5, HTXD6i, STXD6i, JWN24HTCSL/HSCSL, QP4TKT, WRS5200, WRSPUDF, WRS5200DFPU, SP2S20H, and MLT25DCA.
• Fuel System Integrity: — A degraded or cracked fuel hose can cause fuel starvation, hard starting, or dangerous leaks at the engine. Replacing with the correct OEM hose restores a sealed, consistent fuel supply to keep the engine running at full output.
• Fire and Fuel Leak Safety: — In fuel-system applications, using a hose rated to the correct pressure specification is critical. The 60028 is rated at 50 PSI, consistent with the fuel system pressures these engines operate under, reducing the risk of hose failure under load.

The fuel hose carries gasoline from the fuel tank to the engine's carburetor or fuel inlet, maintaining a steady, sealed flow of fuel under the low-to-moderate pressure generated by the fuel system. Over time, fuel hoses can harden, crack, or soften from heat cycling and fuel exposure, which can cause fuel leaks, air ingestion into the fuel line, or engine starvation. Replacing a worn hose with a correctly rated OEM component restores the integrity of the fuel circuit and supports consistent engine starts and smooth operation across the full duty cycle.

For fitment questions or help confirming compatibility with your specific serial number, contact the DHS Equipment parts team directly.

Part Details

Compatibility & Fitment

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.