The Multiquip 65810064305 is a genuine OEM Hex Head Bolt (1/4"-20UNC) JPU1 designed for Multiquip rebar bender models JPU1, JB5135, JB7135, JB5090, JB7090, JB8090, JB9180, and JB11090. As a direct OEM replacement sourced through authorized channels, this bolt is manufactured to the exact dimensions and thread specification required by your machine. Multiquip OEM hardware like 65810064305 ensures the fastener seats and torques correctly without guesswork, keeping critical assemblies tight and properly aligned across the full range of compatible rebar bender models.
Key Features
- Correct Thread Specification: — Manufactured to the 1/4"-20UNC thread standard, ensuring proper thread engagement and clamp load in compatible rebar bender assemblies.
- Genuine OEM Part: — Sourced directly from Multiquip, this bolt meets the original design tolerances for head geometry, shank length, and tensile grade — no dimensional guesswork.
- Broad Rebar Bender Compatibility: — Confirmed fitment across JPU1, JB5135, JB7135, JB5090, JB7090, JB8090, JB9180, and JB11090 models, covering a wide range of Multiquip rebar bending equipment.
- Drop-In Hardware Replacement: — Matches the original bolt in thread pitch, hex size, and grade, allowing straightforward installation without re-tapping, shimming, or modification.
- Structural Integrity Maintained: — A correct-spec fastener prevents fastener fatigue, stripping, or loosening under the repetitive load cycles that rebar bending equipment generates during normal use.
A hex head bolt may be a small component, but in rebar bending equipment it plays a direct role in holding together guards, frames, bending dies, and mechanical linkages that are subject to significant cyclic stress. An undersized, incorrect-grade, or worn bolt can back out or fail under load, causing misalignment of the bending assembly or creating a safety hazard for the operator. Using the correct OEM-specified fastener — with the right thread form, shank dimensions, and tensile rating — ensures the assembly stays secure and operates as intended through repeated bending cycles.
For questions about fitment or to confirm this part is correct for your specific unit, contact the DHS Equipment team for assistance.
Part Details
| Part Number | 65810064305 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Hex Head Bolt (1/4"-20UNC) JPU1 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rebar Benders | JB5135 |
| Rebar Benders | JB7135 |
| Rebar Benders | JB5090 |
| Rebar Benders | JB7090 |
| Rebar Benders | JB8090 |
| Rebar Benders | JB9180 |
| Rebar Benders | JB11090 |
| Rebar Benders | JPU1 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
